Schneider Electric ATV31HU15M2

Altivar 31 drive, 1.5 kW, 240 V single-phase

Read from the product label

Maker: Schneider Electric
Part no.: ATV31HU15M2
Serial / rev.: as printed on your unit

Image is for illustrative purposes only. Please refer to product description.

Delivery options

Schneider Electric ATV31HU15M2 is an Altivar 31 variable speed drive for 1.5 kW (2 hp) asynchronous motors on a 200 to 240 V single-phase supply, with an integrated EMC filter.

Manufacturer: Schneider Electric
Manufacturer part no.: ATV31HU15M2
Product family: Altivar 31 Drives (ATV31)
Type: AC drive
Category: Drives › AC drives (VFDs)
Lifecycle: Discontinued
OEM successor: ATV320U15M2C
Technical datasheet: Data sheet

Technical specifications

Manufacturer: Schneider Electric
Manufacturer part no.: ATV31HU15M2
Type: AC drive
Application: AC drive
Used with: Asynchronous motors
Range of product: Altivar
Product or component type: Variable speed drive
Product specific application: Simple machine
Component name: ATV31
Assembly style: With heat sink
EMC filter: Integrated
[Us] rated supply voltage: 200...240 V - 5...5 %
Supply frequency: 50...60 Hz - 5...5 %
Network number of phases: Single phase
Motor power kW: 1.5 kW 4 kHz
Motor power hp: 2 hp 4 kHz
Line current: 13.3 A at 240 V; 15.8 A at 200 V, Isc = 1 kA
Apparent power: 3.2 kVA
Prospective line Isc: 1 kA
Nominal output current: 8 A 4 kHz
Maximum transient current: 12 A for 60 s
Power dissipation in W: 90 W at nominal load
Asynchronous motor control profile: Sensorless flux vector control with PWM type motor control signal; Factory set : constant torque
Analogue input number: 3
Product destination: Asynchronous motors
Supply voltage limits: 170…264 V
Network frequency: 47.5...63 Hz
Output frequency: 0.0005…0.5 kHz
Nominal switching frequency: 4 kHz
Switching frequency: 2...16 kHz adjustable

Show all 83 specifications

Speed range: 1…50
Transient overtorque: 150…170 % of nominal motor torque
Braking torque: <= 150 % during 60 s with braking resistor; 100 % with braking resistor continuously; 150 % without braking resistor
Regulation loop: Frequency PI regulator
Motor slip compensation: Adjustable; Automatic whatever the load; Suppressable
Output voltage: <= power supply voltage
Electrical connection: Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5 mm² 14 AWG; L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 2.5 mm² 14 AWG
Tightening torque: Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6: 0.6 N.m; L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-: 0.8 N.m
Insulation: Electrical between power and control
Supply: Internal supply for logic inputs: 19...30 V 100 mA, protection type: overload and short-circuit protection; Internal supply for reference potentiometer (2.2 to 10 kOhm): 10...10.8 V 10 mA, protection type: overload and short-circuit protection
Analogue input type: AI3 configurable current 0...20 mA, impedance: 250 Ohm; AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance: 30000 Ohm; AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance: 30000 Ohm
Sampling duration: LI1...LI6: 4 ms discrete; AI1, AI2, AI3: 8 ms analog
Response time: AOV, AOC 8 ms for analog; R1A, R1B, R1C, R2A, R2B 8 ms for discrete
Linearity error: +/- 0.2 % for output
Analogue output number: 2
Analogue output type: AOC configurable current: 0...20 mA, impedance: 800 Ohm, resolution: 8 bits; AOV configurable voltage: 0...10 V, impedance: 470 Ohm, resolution: 8 bits
Discrete input logic: Positive logic (source) (LI1...LI6), 11 V (state 1); Logic input not wired (LI1...LI4), 19 V (state 0)
Discrete output number: 2
Discrete output type: Configurable relay logic: (R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles; Configurable relay logic: (R2A, R2B) NC - 100000 cycles
Minimum switching current: R1-R2 10 mA at 5 V DC
Maximum switching current: R1-R2: 2 A at 250 V AC inductive load, cos phi = 0.4 and L/R = 7 ms; R1-R2: 2 A at 30 V DC inductive load, cos phi = 0.4 and L/R = 7 ms; R1-R2: 5 A at 250 V AC resistive load, cos phi = 1 and L/R = 0 ms; R1-R2: 5 A at 30 V DC resistive load, cos phi = 1 and L/R = 0 ms
Discrete input number: 6
Discrete input type: (LI1...LI6) programmable at 24 V, 0…100 mA for PLC, impedance: 3500 Ohm
Acceleration and deceleration ramps: Linear adjustable separately from 0.1 to 999.9 s; S, U or customized
Braking to standstill: By DC injection
Protection type: Input phase breaks: drive; Line supply overvoltage and undervoltage safety circuits: drive; Line supply phase loss safety function, for three phases supply: drive; Motor phase breaks: drive; Overcurrent between output phases and earth (on power up only): drive; Overheating protection: drive; Short-circuit between motor phases: drive; Thermal protection: motor
Insulation resistance: >= 500 mOhm 500 V DC for 1 minute
Display type: 1 LED (red) for drive voltage; Four 7-segment display units for CANopen bus status
Time constant: 5 ms for reference change
Frequency resolution: Display unit: 0.1 Hz; Analog input: 0.1...100 Hz
Connector type: 1 RJ45 for CANopen via VW3 CANTAP2 adaptor; 1 RJ45 for Modbus
Physical interface: RS485 multidrop serial link for CANopen via VW3 CANTAP2 adaptor; RS485 multidrop serial link for Modbus
Transmission frame: RTU for CANopen via VW3 CANTAP2 adaptor; RTU for Modbus
Transmission rate: 10, 20, 50, 125, 250, 500 kbps or 1 Mbps for CANopen via VW3 CANTAP2 adaptor; 4800, 9600 or 19200 bps for Modbus
Number of addresses: 1…127 for CANopen via VW3 CANTAP2 adaptor; 1…247 for Modbus
Number of drive: 127 for CANopen via VW3 CANTAP2 adaptor; 31 for Modbus
Marking: CE
Operating position: Vertical +/- 10 degree
Outer dimension: 200 x 180 x 144 mm; 184 x 149 x 145 mm; 143 x 105 x 150 mm
Net weight: 1.8 kg
Dielectric strength: 2040 V DC between earth and power terminals; 2880 V AC between control and power terminals
Electromagnetic compatibility: 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5; Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4; Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2; Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
Standards: EN 50178
Product certifications: N998; C-Tick; CSA; UL
IP degree of protection: On upper part: IP20 (without cover plate); On connection terminals: IP21; On upper part: IP31; On upper part: IP41
Pollution degree: 2
Protective treatment: TC
Vibration resistance: 1 gn (f= 13…150 Hz) conforming to EN/IEC 60068-2-6; 1.5 mm (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance: 15 gn for 11 ms conforming to EN/IEC 60068-2-27
Relative humidity: 5…95 % without condensation conforming to IEC 60068-2-3; 5…95 % without dripping water conforming to IEC 60068-2-3
Ambient air temperature for storage: -25…70 °C
Ambient air temperature for operation: -10…50 °C without derating (with protective cover on top of the drive); -10…60 °C with derating factor (without protective cover on top of the drive)
Operating altitude: = 1000 m with current derating 1 % per 100 m

Technical documents (1)

Schneider Electric product page ATV31HU15M2

Key features

Sensorless flux vector control for asynchronous motors
Integrated EMC filter and heat sink mounting
6 logic inputs, 3 analogue inputs and 2 relay outputs
Output frequency adjustable up to 0.5 kHz
RJ45 port for Modbus, CANopen via adaptor

About the Schneider Electric ATV31HU15M2

The Schneider Electric ATV31HU15M2 is a variable speed drive from the Altivar 31 range for simple machines. Schneider Electric rates it at 1.5 kW (2 hp) on a 200...240 V single-phase supply, with 8 A nominal output current and 12 A transient current for 60 s. Schneider Electric lists it as discontinued on 31 Dec 2011, with end of service on 31 Dec 2015. It recommends the ATV320U15M2C as its replacement.

What is the ATV31HU15M2 used for?

The ATV31HU15M2 controls the speed of an asynchronous motor on a simple machine such as a conveyor, pump or fan. It is started and set from its logic and analogue inputs or over Modbus.

Lifecycle and successor

Discontinued.

OEM successor: ATV320U15M2C

Before you order

What to photograph or confirm so the right unit is quoted.

Check the reference ATV31HU15M2 on the drive's rating label, with its product version. Send us a photo of the label and we will confirm the details before quoting.

OEM successor to ATV31HU15M2

Named by Schneider Electric as the successor. It is an upgrade, not a like-for-like spare: check wiring, I/O and configuration for your installation before ordering it in place of the ATV31HU15M2.

ATV320U15M2CAC drive

Successor’s lifecycle–

Ask us

Other parts in the Schneider Electric Altivar 31 drives family

Listed for reference. They differ from the ATV31HU15M2 in rating, supply, interface or function and are not interchangeable with it unless Schneider Electric says so. Match the part number on your unit.

Product	Type	Lifecycle	Qty Available	Price	Action
Schneider Electric ATV31C037M2Altivar 31 enclosed drive, 0.37 kW, 240 V	AC drive	Discontinued	On request	On request	View

You may also be interested in

TimControls is an independent distributor. Manufacturer names and logos are the property of their respective owners and identify products we source; they do not imply manufacturer authorization or affiliation.

Need Schneider Electric ATV31HU15M2? Send us the details.

Request a Quote