Allen-Bradley 1762-OW16

Technical specifications

Manufacturer

Allen-Bradley

Manufacturer part no.

1762-OW16

Type

Digital output module

Application

Expansion I/O

Used with

MicroLogix 1100, 1200 and 1400 controllers

Voltage category

AC/DC normally open relay

Operating voltage range

5…265V AC 5…125V DC

Number of outputs

16

Number of commons

2

Bus current draw, max

140 mA @ 5V DC (0.70 W) 180 mA @ 24V DC (4.32 W)

Heat dissipation, max

6.1 watts

Signal delay, max

On delay: 10 ms, Off delay: 10 ms

Off-state leakage, max

0 mA

On-state current, min

10 mA

Surge current, max

See Table 30

Technical documents (1)

• Rockwell Automation MicroLogix selection guide 1761-SG001

Key features

• 16 normally open AC/DC relay outputs
• Two commons for the 16 outputs
• Maximum on and off delay of 10 ms each
• Off-state leakage maximum of 0 mA
• Minimum on-state current of 10 mA

About the Allen-Bradley 1762-OW16

The 1762-OW16 is a MicroLogix 16 point relay output module. Its 16 normally open AC/DC relay outputs sit on 2 commons, working from 5…265V AC and 5…125V DC, with signal delays of 10 ms on and 10 ms off maximum. It draws up to 140 mA at 5V DC and 180 mA at 24V DC from the bus and dissipates up to 6.1 watts.

What is the 1762-OW16 used for?

It adds 16 relay outputs to a MicroLogix controller for switching AC or DC loads. Minimum on-state current is 10 mA and off-state leakage is 0 mA.

Lifecycle and successor

Active Mature (Rockwell Automation lifecycle status, checked 24 October 2026).

Before you order

What to photograph or confirm so the right unit is quoted.

Read the catalog number 1762-OW16, the series letter and the firmware revision from the label. Send us a photo of the label and we confirm the match before we quote.