1769-AENTR

Technical specifications

Manufacturer

Allen-Bradley

Manufacturer part no.

1769-AENTR

Type

EtherNet/IP adapter module

Application

Communication module

Used with

CompactLogix and 1769 Compact I/O

Height

118mm

Interface

2 Ethernet RJ45 Category 5

Isolation

50V (continuous), basic

Conducted RF immunity

10V rms with 1 kHz sine-wave 80% AM from 150 kHz...80 MHz

Current draw

500mA @ 5.2V DC

Depth

87 mm

EFT/B immunity

±3kV @ 5kHz on communications ports

Emissions

CISPR 11 (IEC 61000-6-4): Class A

Enclosure type rating

None (open-style)

ESD immunity

6 kV contact discharges, 8 kV air discharges

EtherNet/IP communication rate

10/100 Mbps

Isolation voltage

50V (continuous), basic insulation type, Tested at 710V DC @ 60s

Logix communication connections

128

Module location

DIN rail or panel mount

Mounting screw torque

1.16 Nm (10 in-lb) - use M4 or #8 screws

Nonoperating temperature

-40 to 85 °C

Number of HW-interfaces industrial Ethernet

2

Operating temperature

0 to 60 °C

Ports

2 Ethernet RJ45 Category 5

Radiated RF immunity

10V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10V/m with 200 Hz 50% Pulse 100% AM at 900 MHz, 10V/m with 200 Hz 50% Pulse 100% AM at 1890 MHz, 10V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz

Relative humidity

5...95% noncondensing

Shock

Operating: 15 G

Slot width

1

Supporting protocol for EtherNet/IP

Yes

Supporting protocol for TCP/IP

Yes

Technical documents (1)

• Rockwell Automation technical data 1769-TD006

Key features

• Two RJ45 Category 5 Ethernet ports
• EtherNet/IP communication rate of 10/100 Mbps
• 128 Logix and 96 TCP/IP communication connections
• DIN rail or panel mounting, one slot wide
• Operating temperature 0 to 60 °C, open-style enclosure

About the Allen-Bradley 1769-AENTR

The Allen-Bradley 1769-AENTR is listed by Rockwell Automation as a 1769 Ethernet/IP Adapter, with a lifecycle status of Active Mature. Rockwell's product data gives two Ethernet RJ45 Category 5 ports, a 10/100 Mbps EtherNet/IP communication rate, 128 Logix communication connections and 96 TCP/IP communication connections. Current draw is 500 mA at 5.2 V DC, and the module measures 118 mm high, 50 mm wide and 87 mm deep, weighing approximately 0.28 kg. Rockwell specifies an operating temperature of 0 to 60 °C, relative humidity of 5 to 95% noncondensing and an open-style enclosure with no type rating.

What is the 1769-AENTR used for?

Rockwell lists the module as supporting both EtherNet/IP and TCP/IP protocols, so it provides Ethernet communication for a 1769 station in a Logix control system. It offers 128 Logix communication connections and 96 TCP/IP communication connections. Being open-style with no enclosure rating, it is mounted on a DIN rail or panel inside a suitable enclosure.

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

Check that the catalog number on the module label reads 1769-AENTR, and note the series letter and firmware revision shown on the same label. Send us a photo of the label if you want us to confirm the part before you order.