132F0016

Technical specifications

Manufacturer

Danfoss

Manufacturer part no.

132F0016

Type

AC drive

Application

AC motor speed control

Used with

Three-phase AC motors

Type code

FC-051P3K7

Mains supply

3x200-240 V ±10%

Typical shaft output

3.7 kW (5 hp)

Enclosure size

M3

Output current, continuous (3x200-240 V)

15.2 A

Output current, intermittent (3x200-240 V)

22.8 A

Input current, continuous (3x200-240 V)

24.3 A

Input current, intermittent (3x200-240 V)

35.3 A

Maximum cable size (mains, motor)

4 mm² / AWG 10

Estimated power loss, best case/typical

115.0/122.8 W

Efficiency, best case/typical

97.3/97.4 %

Weight

3 kg

Supply frequency

50/60 Hz

Output voltage

0-100 % of supply voltage

Output frequency

0-200 Hz (VVC+), 0-400 Hz (u/f)

Ramp times

0.05-3600 s

Overload

150 % for 1 minute (normal overload)

Enclosure protection rating

IP20 (IP21/TYPE 1 kit available)

Ambient temperature

Maximum 40 °C; 0 °C minimum at full performance

Maximum motor cable length

15 m shielded; 50 m unshielded

Energy efficiency class

IE2

Technical documents (1)

• Danfoss VLT Micro Drive FC 51 Design Guide MG02K402

Key features

• 3.7 kW (5 hp) typical shaft output
• Mains supply 3x200-240 V
• Enclosure size M3, IP20
• Output 0-200 Hz (VVC+) or 0-400 Hz (u/f)
• 150 % overload for 1 minute
• Built-in brake chopper
• Danfoss lists the FC 51 as discontinued; successor iC2-Micro

About the Danfoss 132F0016

The Danfoss 132F0016 is a VLT Micro Drive FC 51 frequency converter of 3.7 kW for 3x200-240 V supplies, type code FC-051P3K7, in enclosure size M3 (IP20). Danfoss's FC 51 design guide gives it a continuous output current of 15.2 A and 150 % overload for one minute, with an output of 0 to 200 Hz in VVC+ or 0 to 400 Hz in u/f mode. It has a built-in brake chopper. Danfoss's product page states that the VLT Micro Drive FC 51 has reached the Limited phase of its lifecycle, meaning it is discontinued and no longer in production, and names iC2-Micro as its successor.

What is the 132F0016 used for?

It controls the speed of a small three-phase AC motor on fans, pumps, conveyors and simple machines. A failed unit stops the motor it drives.

Lifecycle and successor

Discontinued.

OEM successor: iC2-Micro

Before you order

What to photograph or confirm so the right unit is quoted.

Check the ordering number (132F0016) and the type code (FC-051P3K7…) on the drive's label; the letters after the power code give the supply, enclosure and filter options. Send the whole label if you can.