DEIF PPU 300

Technical specifications

Manufacturer

DEIF

Manufacturer part no.

PPU 300

Type

Paralleling & protection unit

Application

Marine and offshore power systems

Used with

Diesel generators, shaft generators, battery storage, shore connections, bus-tie breakers

Function

Paralleling and protection controller for a generator, inverter, shaft generator, shore connection or bus tie breaker

System size

Up to 32 controllers in one system with load-sharing sections

Controller types

GENSET, BUS TIE breaker, SHAFT generator, SHORE connection

Voltage measurement

100 to 690 V AC phase-to-phase nominal (range 2 to 897 V AC); class 0.2

Current measurement

1 or 5 A AC from current transformer; class 0.2

Frequency measurement

50 or 60 Hz nominal; range 35 to 78 Hz

Power measurement accuracy

Class 0.5

Supply voltage

12 or 24 V DC nominal (8 to 36 V DC continuously)

Display

DU 300 5-inch colour graphic display; up to 2 per controller

Communication

Ethernet; Modbus TCP/IP; up to 20 Modbus signals per controller

PLC option

CODESYS (add-on)

Construction

Modular rack (R4.1 or R7.1) with plug-in hardware modules; optional I/O extension rack

Ingress protection

IP20 (all slots fitted)

Operating temperature

Rack and modules -40 to 70 °C; display unit -20 to 70 °C

Humidity

97% RH condensing (IEC 60068-2-30)

EMC

EN 61000-6-2/-6-3, IEC 60533 power distribution zone, IACS UR E10

Dimensions (rack R7.1)

L 230.1 x H 199.9 x D 157.5 mm

Approvals

CE; UL/cUL Listed (UL508); marine approvals listed by DEIF

Technical documents (1)

• DEIF PPU 300 data sheet (4921240563)

Key features

• One controller for genset, bus tie, shaft generator or shore connection
• Up to 32 controllers with load-sharing sections
• Class 0.2 voltage and current measurement up to 690 V AC
• Modular rack with plug-in modules, replaceable on site
• 5-inch DU 300 display, Modbus TCP/IP and optional CODESYS PLC
• Operates from -40 to 70 °C

About the DEIF PPU 300

The DEIF PPU 300 is a paralleling and protection unit from DEIF's Multi-line 300 platform, designed for marine use. One controller contains the functions to protect and control a generator or inverter and its breaker, and it can be configured as a genset, bus tie breaker, shaft generator or shore connection controller. Up to 32 controllers form one system with load-sharing sections. The controller is modular: measurement, input/output and communication modules plug into a rack and can be added or replaced on site. DEIF lists the PPU 300 as not recommended for new designs and names the iE 250 Marine as its successor.

What is the PPU 300 used for?

The PPU 300 is installed in the main switchboard of vessels and offshore units, one controller per generator, shaft generator, shore connection or bus tie breaker, where it handles synchronisation, load sharing and generator protection. It suits vessels with several power sources on the busbar, including generators, battery inverters, shaft generators and shore connections.

Lifecycle and successor

Phased out.

OEM successor: iE 250 Marine

Before you order

What to photograph or confirm so the right unit is quoted.

Identify the controller type (GENSET, BUS TIE, SHAFT or SHORE), the rack size (R4.1 or R7.1), the installed hardware modules and whether the CODESYS option is fitted. The order code and variant are on the rack label. Send a label photo and, if available, a PICUS configuration backup.