Image is for illustrative purposes only. Please refer to product description.
- Manufacturer
- Eurotherm
- Manufacturer part number
- TE200A/
25A/ 500V - Product family
- TE200A Two Leg Burst Firing Thyristor Units
- Technical datasheet
- Data sheet
Specifications
| Attribute | Value |
|---|---|
| Type | Thyristor power controller |
| Manufacturer lifecycle | Discontinued |
| OEM successor | EPack Lite-2PH / EPack-2PH |
| Rated current | 25 A at 45 °C per phase |
| Rated voltage | 500 V AC line to line |
| Phases | Three phase, two controlled phases (third phase direct) |
| Cooling | Natural convection |
| Fuse and holder (Eurotherm code) | FU1038/25A/00, 2 off (order separately); spare fuse CH260034 |
| Mounting | DIN rail (two symmetric DIN rails, EN 50022) |
| Dimensions | 189 x 116 x 131 mm (H x W x D) |
| Weight | 2.3 kg |
| Supply frequency | 50 or 60 Hz (±2 Hz), automatic |
| Supply voltage tolerance | ±10% of the nominal voltage |
| Load | Three wire, three phase resistive load with low temperature coefficient, or short wave infrared (not 63 A) |
| Linearity and stability | Better than ±2% of full scale |
Show all 21 specificationsShow fewer specifications
| Insulation | 2000 V AC power to earth; 3600 V AC power to control |
|---|---|
| Heat dissipation | 1.3 W per amp per phase; 0.7 W more with external fuses |
| Operating temperature | 0 to 60 °C, ratings at 45 °C |
| Storage temperature | -10 to 70 °C |
| Protection | IP20, overvoltage category 3, pollution degree 2 |
| Approvals | CE (Low Voltage Directive); EMC emission to EN 55011 class A |
Description
The Eurotherm TE200A 25 A, 500 V is a two leg three phase thyristor unit rated 25 A at 45 °C on a 500 V supply. It switches two phases of a three wire load at zero crossing, leaving the third phase connected. Eurotherm's matching high speed fuse and holder is FU1038/25A/00. The rest of the order code sets the firing mode, control input, fusing, manual language and options: send the full code from the label and we quote the matching unit. The TE200A is at end of service; Eurotherm's equivalent products are EPack Lite-2PH or EPack-2PH, a different unit.
Application: Furnaces, ovens and process heating
Used with: Two leg three phase heating loads
What is the TE200A 25A 500V used for?
Typical uses: heat treatment, metallurgy, plastics, foods and environmental temperature control.
Key features
- 25 A at 45 °C, 500 V
- Three phase, two controlled phases (third phase direct)
- Fuse and holder (Eurotherm code): FU1038/25A/00, 2 off (order separately); spare fuse CH260034
Documents and Resources
OEM successor to TE200A 25A 500V
EPack Lite-2PH / EPack-2PH is named by Eurotherm as an equivalent product, not a direct replacement: check wiring, I/O and configuration for your installation before ordering it. Contact sales@timcontrols.com if you need one.
Associated Products
| Image | Product | Description | Stock | View | Add to RFQ |
|---|---|---|---|---|---|
 | TE200A 25A 480VEurotherm | Two leg three phase thyristor unit, 25 A, 480 V | In stock | View | |
 | TE200A 40A 500VEurotherm | Two leg three phase thyristor unit, 40 A, 500 V | In stock | View |
Product Questions
Is the TE200A 25A 500V discontinued?
Yes. Its manufacturer lifecycle status is Discontinued.
Is there a replacement for the TE200A 25A 500V?
Eurotherm names the EPack Lite-2PH / EPack-2PH as an equivalent product, not a direct replacement: check ratings, wiring and configuration before ordering it in its place.
Do you ship worldwide?
Yes. TimControls ships worldwide. Parts usually ship within 3 to 7 working days of order confirmation, and the exact lead time and shipping options are stated on your quote. Include your delivery country and postal code when you ask for a quote.
Latest news
TimControls is an independent distributor. Manufacturer names and logos are the property of their respective owners and identify products we source; they do not imply manufacturer authorization or affiliation.