Omron NX-MD6256-5

Technical specifications

Manufacturer

Omron

Manufacturer part no.

NX-MD6256-5

Type

Digital I/O module

Application

I/O module

Used with

NX-series controllers and NX bus couplers

I/O system

NX I/O Bus

Type of module

Digital I/O

Number of digital inputs

16

Digital input type

PNP/NPN

Permitted voltage at input

15-28.8 V

OFF/ON delay

0.02-0.4 ms

Number of digital outputs

16

Digital output type

PNP

Permitted voltage at output

20.4-28.8 V

Output current

0.5 A

Connection method

1-wire

Signal processing

Free running, Standard speed, Synchronous

I/O connection type

MIL (plug not included)

Number of I/O connectors

2

Number of IOV (V+) terminals

2

Number of IOG (V-) terminals

2

Number of COM terminals

2

Degree of protection (IP)

IP20

Height

100 mm

Width

30 mm

Depth

89.52 mm

Weight

160 g

Technical documents (1)

• Omron product page NX-MD6256-5

Key features

• Signal processing: Free running, Standard speed, Synchronous
• OFF/ON delay: 0.02-0.4 ms
• Connection method: 1-wire
• Degree of protection (IP): IP20
• Number of I/O connectors: 2

About the Omron NX-MD6256-5

The Omron NX-MD6256-5 is an NX digital I/O unit. Omron describes it as: 16 Digital Inputs + 16 Digital PNP Outputs, Standard speed, 24 VDC, 2 x MIL20 connectors (not included), 30 mm wide. Its specification table gives 16 digital inputs, 16 digital outputs and PNP/NPN inputs. Omron's European product page carries no end-of-production notice for it.

What is the NX-MD6256-5 used for?

The NX-MD6256-5 slots onto the NX I/O bus next to an NX controller or bus coupler, carrying its digital I/O signals to and from the machine.

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the model number NX-MD6256-5 on the unit's label, with its lot number. Send us a photo of the label and we will confirm the details before quoting.