Schneider Electric 140AMM09000C

Technical specifications

Manufacturer

Schneider Electric

Manufacturer part no.

140AMM09000C

Type

Analog I/O module

Application

I/O module

Used with

Modicon Quantum 140XBP backplane

Range of product

Modicon Quantum automation platform

Product or component type

Input/output analog module

Type of filter

Single pole low pass - 3 dB at 21 Hz +/- 20 % input circuit

I/O modularity

6 channels

Addressing requirement

2 output words; 5 input words

Analogue input number

4

Analogue input type

Bipolar current +/- 20 mA - resolution: 15 bits DC; Bipolar voltage +/- 10 V - resolution: 16 bits DC; Bipolar voltage +/- 5 V - resolution: 15 bits DC; Unipolar current 0...20 mA - resolution: 15 bits DC; Unipolar offset current 4...20 mA - resolution: 14 bits DC; Unipolar offset voltage 1...5 V - resolution: 14 bits DC; Unipolar voltage 0...10 V - resolution: 16 bits DC; Unipolar voltage 0...5 V - resolution: 15 bits DC

Absolute maximum input

+/- 25 mA current; +/- 50 V voltage

Input impedance

> 10 MOhm voltage; > 250 Ohm current

Offset

+/- 0.0014 % of full scale maximum/°C 0...60 °C input circuit

Gain shift

+/- 0.002 of full scale maximum 0...60 °C input circuit

Common mode rejection

> 80 dB 50/60 Hz input circuit

Analogue output number

2

Analogue output range

4...20 mA

Analogue output resolution

12 bits

Loop voltage

0…60 V DC with external resistance output circuit; 7…30 V DC output circuit

Maximum voltage drop

<30 V DC at 20 mA

Setting time

900 µs to +/- 0.1 % of the final value output circuit

External power requirement

7...30 V output circuit

Absolute accuracy error

+/- 0.004 % of full scale at 0…60 °C output circuit; +/- 0.007 %/°C of full scale maximum at 0…60 °C output circuit; +/- 0.03 % at 25 °C input circuit; +/- 0.05 % of full scale maximum at 25 °C input circuit; +/- 0.20 % of full scale at 25 °C output circuit

Linearity

2.4 % over and under range voltage; 2.4 % over range, and - 9.6 % under range current; Monotonic +/- 1 LSB input; Monotonic +/- 1 LSB output

Update time

15 ms output circuit; 320 ms input circuit

Fault type

Open circuit input/output circuit; Overtacking scale (unipolar) input circuit; Status byte output circuit

Isolation between channels

500 V AC for 1 minute; 750 V DC for 1 minute

Isolation between channels and bus

500 V AC for 1 minute; 750 V DC for 1 minute

Technical documents (1)

• Schneider Electric product page 140AMM09000C

Key features

• Isolation between channels and bus: 500 V AC for 1 minute
• Input impedance: > 10 MOhm voltage
• Local signalling: 1 LED (green) for bus communication is present (Active)
• Module format: Standard
• Net weight: 0.3 kg

About the Schneider Electric 140AMM09000C

The Schneider Electric 140AMM09000C is an input/output analog module from Schneider Electric's Modicon Quantum range, which Schneider names "analog input output module Modicon Quantum - 4 I - 2 O". Its product page gives 4 analogue inputs and 2 analogue outputs. Schneider Electric lists it as discontinued since 31 Dec 2021, with end of service on 31 Dec 2029. Schneider Electric recommends the BMXAMM0600H as its replacement.

What is the 140AMM09000C used for?

The 140AMM09000C sits in a Modicon Quantum rack and connects field signals to the controller, which reads or writes them each cycle.

Lifecycle and successor

Discontinued.

OEM successor: BMXAMM0600H

Before you order

What to photograph or confirm so the right unit is quoted.

Check the reference 140AMM09000C on the module's label, with its product version. Send us a photo of the label and we will confirm the details before quoting.