Schneider Electric TM3AQ4

Technical specifications

Manufacturer

Schneider Electric

Manufacturer part no.

TM3AQ4

Type

Analog output module

Application

I/O module

Used with

Modicon M221, M241, M251 and M262 controllers

Range of product

Modicon TM3

Product or component type

Analog output module

Range compatibility

Modicon M221; Modicon M241; Modicon M251; Modicon M262

Analogue output number

4

Analogue input resolution

12 bits; 11 bits + sign

Stabilisation time

1 ms

Analogue output type

Current: 4...20 mA; Current: 0...20 mA; Voltage: 0...10 V; Voltage: - 10...10 V

Conversion time

1 ms + 1 ms per channel + 1 controller cycle time

Absolute accuracy error

+/- 1 % of full scale; +/- 0.2 % of full scale at 25 °C

Repeat accuracy

+/- 0.4 %FS

Output ripple

20 mV

Cross talk

<= 1 LSB

Type of cable

Twisted shielded pairs cable <30 m for output circuit

Electrical connection

11 x 2.5 mm² removable screw terminal block with pitch 5.08 mm adjustment for outputs and supply

LSB value

2.44 mV, 0...10 V; 4.88 mV, - 10...10 V; 4.88 µA, 0...20 mA; 3.91 µA, 4...20 mA

Insulation

Between output and supply at 1500 V AC; Between output and internal logic at 500 V AC

Immunity to microbreaks

10 ms

Load impedance ohmic

1 kOhm voltage; 300 Ohm current

load type

Resistive

Temperature drift

+/- 0.01 %FS/°C

Non-linearity

+/- 0.2 %FS

Typical current consumption

40 mA at 5 V DC no load; 50 mA at 5 V DC full load; 50 mA at 24 V DC no load; 125 mA at 24 V DC full load

Local signalling

1 LED green for PWR

Mounting support

Top hat type TH35-15 rail conforming to IEC 60715; Top hat type TH35-7.5 rail conforming to IEC 60715; plate or panel with fixing kit

Height

90 mm

Technical documents (1)

• Schneider Electric product page TM3AQ4

Key features

• Local signalling: 1 LED green for PWR
• IP degree of protection: IP20
• Net weight: 0.115 kg

About the Schneider Electric TM3AQ4

The Schneider Electric TM3AQ4 is an analog output module from Schneider Electric's Modicon TM3 range, which Schneider names "Modicon TM3 - 4 analog outputs (screw) 24Vdc". Its product page gives 4 analogue outputs and Current: 4...20 mA. Schneider Electric lists it as Active.

What is the TM3AQ4 used for?

The TM3AQ4 clips onto a Modicon logic controller to add I/O, which the controller reads or writes each cycle.

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the reference TM3AQ4 on the module's label, with its product version. Send us a photo of the label and we will confirm the details before quoting.