Schneider Electric TM3DM24R

Technical specifications

Manufacturer

Schneider Electric

Manufacturer part no.

TM3DM24R

Type

Digital I/O module

Application

I/O module

Used with

Modicon M221, M241, M251 and M262 controllers

Range of product

Modicon TM3

Product or component type

Discrete I/O module

Range compatibility

Modicon M241; Modicon M251; Modicon M221; Modicon M262

Device application

Industrial application

Discrete input number

16

Discrete input logic

Sink or source (positive/negative)

Discrete output number

8

Discrete output logic

Positive or negative

Discrete output voltage

24 V DC for relay outputs; 240 V AC for relay outputs

Discrete input compatibility

16 conforming to IEC 61131-2 Type 1

Discrete input current

7 mA

Voltage state 1 guaranteed

Input: 15...28.8 V DC

Voltage state 0 guaranteed

0...5 V input

Current state 1 guaranteed

>= 2.5 mA input

Current state 0 guaranteed

<= 1 mA input

Input impedance

3.4 kOhm

Response time on input

4 ms (maximum (turn on)); 4 ms (maximum (turn off))

Discrete output current

2000 mA relay output

Minimum switching current

10 mA 5 V DC

Response time on output

<= 10 ms maximum (turn on); <= 5 ms maximum (turn off)

Mechanical durability

20000000 cycles

Safety reliability data

MTBF = 130 years 40 °C

Power supply type

Electronic powered by internal bus

Typical current consumption

5 mA at 5 V DC; 0 mA at 24 V DC; 65 mA at 5 V DC

Electrical connection

17 x 1.5 mm² removable screw terminal block with pitch 3.81 mm adjustment for inputs; 11 x 1.5 mm² removable screw terminal block with pitch 3.81 mm adjustment for outputs

Technical documents (1)

• Schneider Electric product page TM3DM24R

Key features

• Input impedance: 3.4 kOhm
• Local signalling: 1 LED per channel (green) for I/O state
• IP degree of protection: IP20

About the Schneider Electric TM3DM24R

The Schneider Electric TM3DM24R is a discrete I/O module from Schneider Electric's Modicon TM3 range, which Schneider names "Modicon TM3 - 24 IO (16 inputs, 8 relay outputs, screw) 24Vdc". Its product page gives 16 discrete inputs, 8 discrete outputs and 24 V DC for relay outputs. Schneider Electric lists it as Active.

What is the TM3DM24R used for?

The TM3DM24R clips onto a Modicon logic controller to add I/O, which the controller reads or writes each cycle.

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the reference TM3DM24R on the module's label, with its product version. Send us a photo of the label and we will confirm the details before quoting.