Schneider Electric TSXASY800C

Technical specifications

Manufacturer

Schneider Electric

Manufacturer part no.

TSXASY800C

Type

Analog output module

Application

I/O module

Used with

Modicon Premium TSXRKY rack

Range of product

Modicon Premium Automation platform

Product or component type

Analog output module

Analogue output number

8

Analogue output type

Current: 0...20 mA; Current: 4...20 mA; Voltage: +/- 10 V

Analog/digital conversion

13 bits + sign +/- 10 V; 13 bits 0...20 mA; 13 bits 4...20 mA

Conversion time

5 ms

Measurement resolution

1.28 mV +/- 10 V; 2.56 µA 0...20 mA; 2.56 µA 4...20 mA

Electrical connection

1 SUB-D 25 connector

Measurement error

0.14 % of full scale +/- 10 V 25 °C; 0.21 % of full scale 0...20 mA 25 °C; 0.21 % of full scale 4...20 mA 25 °C; 0.28 % of full scale +/- 10 V 0...60 °C; 0.52 % of full scale 0...20 mA 0...60 °C; 0.52 % of full scale 4...20 mA 0...60 °C

Isolation between channels

Common point

Isolation between channels and bus

1000 Vrms

Isolation between channels and ground

1000 Vrms

Protection type

Overload protection; Short-circuit protection

Output voltage limits

<= 30 V

Load impedance ohmic

1000 Ohm +/- 10 V

Maximum load inductance

0.3 mH

Maximum load capacitance

0.1 µF

Marking

CE

Current consumption

200 mA at 5 V DC; 300 mA at 24 V DC

Module format

Standard

Terminals description PLC n°1

(20)OUT_ANA_COM#4; PW_POS#; (6)OUT_ANA_COM#3; (16)OUT_ANA_CUR#1; (13)IN_ANA_STD#; (2)OUT_ANA_CUR#0; (9)OUT_ANA_COM#5; (25)OUT_ANA_CUR#7; (4)OUT_ANA_VOLT#2; (21)OUT_ANA_VOLT#5; (1)OUT_ANA_VOLT#0; (11)OUT_ANA_CUR#6; (3)OUT_ANA_COM#1; (22)OUT_ANA_CUR#5; (8)OUT_ANA_CUR#4; (10)OUT_ANA_VOLT#6; (15)OUT_ANA_VOLT#1; (12)OUT_ANA_COM#7; (19)OUT_ANA_CUR#3; (17)OUT_ANA_COM#2; (14)OUT_ANA_COM#0; (24)OUT_ANA_VOLT#7; PW_NEG#; (5)OUT_ANA_CUR#2; (7)OUT_ANA_VOLT#4; (23)OUT_ANA_COM#6; (18)OUT_ANA_VOLT#3

Standards

CSA C22.2 No 213 Class I Division 2 Group D; UL 508; IEC 61131-2; CSA C22.2 No 213 Class I Division 2 Group A; 89/336/EEC; 92/31/EEC; 93/68/EEC; CSA C22.2 No 213 Class I Division 2 Group C; CSA C22.2 No 213 Class I Division 2 Group B; 73/23/EEC; CSA C22.2 No 142

Product certifications

RINA; ABS; RMRS; DNV; LR; BV; GL

Ambient air temperature for operation

0…60 °C

Ambient air temperature for storage

-25…70 °C

Technical documents (1)

• Schneider Electric product page TSXASY800C

Key features

• Isolation between channels and bus: 1000 Vrms
• Protection type: Overload protection
• Module format: Standard
• IP degree of protection: IP20

About the Schneider Electric TSXASY800C

The Schneider Electric TSXASY800C is an analog output module from Schneider Electric's Modicon Premium range, which Schneider names "analog output module - 8 output - current,voltage - 13 bits,13 bits,13 bits+sign". Its product page gives 8 analogue outputs, Current: 0...20 mA, 1 SUB-D 25 connector and 200 mA at 5 V DC consumption. Schneider Electric lists it as discontinued since 31 Dec 2017, with end of service on 31 Dec 2026. Schneider Electric recommends the BMXAMO0802 as its replacement.

What is the TSXASY800C used for?

The TSXASY800C sits in a Modicon Premium rack and connects field signals to the controller, which reads or writes them each cycle.

Lifecycle and successor

Discontinued.

OEM successor: BMXAMO0802

Before you order

What to photograph or confirm so the right unit is quoted.

Check the reference TSXASY800C on the module's label, with its product version. Send us a photo of the label and we will confirm the details before quoting.