ABB 3BSE008510R1 DO810

Technical specifications

Manufacturer

ABB

Manufacturer part no.

3BSE008510R1

Type

Digital output module

Application

Switches discrete field outputs according to controller commands.

Used with

TU810, TU812, TU814, TU830

Module model

DO810

Article number

3BSE008510R1

Type

Digital Output

Number of channels

16

Signal specification

24V d.c. (12 - 32 V d.c.), 0.5 A

Signal type

Current sourcing, current limiting

HART

No

SOE

No

Redundancy

No

High integrity

No

Intrinsic safety

No

Isolation

Groupwise isolated from ground

Output load

< 0.4 Ω

Current limiting

Short circuit proof current limited output

Power dissipation

Typ. 2.1 W

Current consumption +5 V Modulebus

80 mA

Temperature, Operating

0 to +55 °C (+32 to +131 °F), approvals are issued for +5 to +55 °C

Temperature, Storage

-40 to +70 °C (-40 to +158 °F)

Relative humidity

5 to 95 %, non-condensing

Protection class

IP20 according to IEC 60529

Use with MTU

TU810, TU812, TU814, TU830

Keying code

AA

Width

45 mm

Height

119 mm

Depth

102 mm, 111 mm including connector

Technical documents (1)

• ABB DO810 technical data and PDF export

Key features

• 16 digital output channels
• Signal range: 24V d.c. (12 - 32 V d.c.), 0.5 A
• Isolation: Groupwise isolated from ground
• Redundancy: No
• HART: No

About the ABB 3BSE008510R1

DO810 (3BSE008510R1) is an ABB S800 digital output module with 16 channels. Signal specification: 24V d.c. (12 - 32 V d.c.), 0.5 A. The module uses the S800 mechanical format. ABB lists groupwise isolated from ground isolation. Order number 3BSE008510R1 identifies this module variant; the model name and revision should be checked together before replacement.

What is the 3BSE008510R1 used for?

Switches discrete field outputs according to controller commands.

Lifecycle and successor

To be confirmed.

Before you order

What to photograph or confirm so the right unit is quoted.

Confirm both DO810 and order number 3BSE008510R1, hardware revision, installed controller and I/O configuration. Match signal range, channel wiring, termination unit and keying. Confirm redundancy or safety requirements against the OEM system documentation; related modules are not automatically interchangeable.