132F0061

Technical specifications

Manufacturer

Danfoss

Manufacturer part no.

132F0061

Type

AC drive

Application

AC motor speed control

Used with

Three-phase AC motors

Type code

FC-051P22K

Mains supply

3x380-480 V ±10%

Typical shaft output

22 kW (30 hp)

Enclosure size

M5

Output current, continuous (3x380-440 V)

43 A

Output current, intermittent (3x380-440 V)

64.5 A

Output current, continuous (3x440-480 V)

40 A

Output current, intermittent (3x440-480 V)

60 A

Input current, continuous (3x380-440 V)

41.2 A

Input current, intermittent (3x380-440 V)

57.6 A

Input current, continuous (3x440-480 V)

37.5 A

Input current, intermittent (3x440-480 V)

53 A

Maximum cable size (mains, motor)

16 mm² / AWG 6

Estimated power loss, best case/typical

467.0/520.0 W

Efficiency, best case/typical

98.1/97.9 %

Supply frequency

50/60 Hz

Output voltage

0-100 % of supply voltage

Output frequency

0-200 Hz (VVC+), 0-400 Hz (u/f)

Ramp times

0.05-3600 s

Overload

150 % for 1 minute (normal overload)

Enclosure protection rating

IP20 (IP21/TYPE 1 kit available)

Ambient temperature

Maximum 40 °C; 0 °C minimum at full performance

Maximum motor cable length

15 m shielded; 50 m unshielded

Energy efficiency class

IE2

Technical documents (1)

• Danfoss VLT Micro Drive FC 51 Design Guide MG02K402

Key features

• 22 kW (30 hp) typical shaft output
• Mains supply 3x380-480 V
• Enclosure size M5, IP20
• Output 0-200 Hz (VVC+) or 0-400 Hz (u/f)
• 150 % overload for 1 minute
• Built-in brake chopper
• Danfoss lists the FC 51 as discontinued; successor iC2-Micro

About the Danfoss 132F0061

The Danfoss 132F0061 is a VLT Micro Drive FC 51 frequency converter of 22 kW for 3x380-480 V supplies, type code FC-051P22K, in enclosure size M5 (IP20). Danfoss's FC 51 design guide gives it a continuous output current of 43 A at 380-440 V and 150 % overload for one minute, with an output of 0 to 200 Hz in VVC+ or 0 to 400 Hz in u/f mode. It has a built-in brake chopper. Danfoss's product page states that the VLT Micro Drive FC 51 has reached the Limited phase of its lifecycle, meaning it is discontinued and no longer in production, and names iC2-Micro as its successor.

What is the 132F0061 used for?

It controls the speed of a small three-phase AC motor on fans, pumps, conveyors and simple machines. A failed unit stops the motor it drives.

Lifecycle and successor

Discontinued.

OEM successor: iC2-Micro

Before you order

What to photograph or confirm so the right unit is quoted.

Check the ordering number (132F0061) and the type code (FC-051P22K…) on the drive's label; the letters after the power code give the supply, enclosure and filter options. Send the whole label if you can.