Mitsubishi Electric QY22

Technical specifications

Manufacturer

Mitsubishi Electric

Manufacturer part no.

QY22

Type

Digital output module

Application

I/O module

Used with

MELSEC-Q base units

Output type

TRIAC output

Number of output points

16 points

Rated load voltage, frequency

100...240 V AC, 50/60 Hz ±5 %

Maximum load current

0.6 A/point, 4.8 A/common

Load voltage distortion rate

Within 5 %

Maximum load voltage

264 V AC

Minimum load voltage/current

24 V AC 100 mA, 100 V AC 25 mA, 240 V AC 25 mA

Maximum inrush current

20 A/cycle or less

Leakage current at OFF

3 mA or less (at 240 V AC, 60 Hz), 1.5 mA or less (at 120 V AC, 60 Hz)

Maximum voltage drop at ON

1.5 V or less

Output response time, OFF to ON

1 ms + 0.5 cycles or less

Output response time, ON to OFF

1 ms + 0.5 cycles or less (rated load, resistive load)

Surge suppressor

CR absorber

Fuse

None (attaching a fuse to each external wiring is recommended.)

Output common terminal arrangement

16 points/common

Isolation method

Photocoupler

Dielectric withstand voltage

2830 V AC rms/3 cycles (altitude 2000 m)

Insulation resistance

10 MΩ or higher by insulation resistance tester

Protection degree

IP1X

Operation indication

ON indication (LED)

External interface,

18-point terminal block (M3 screw)

Number of occupied I/O points

16 points (I/O assignment: Output 16 points)

Internal current consumption (5 V DC)

250 mA (TYP. all points ON)

External dimensions, Height

98 mm

External dimensions, Width

27.4 mm

Technical documents (1)

• Mitsubishi Electric specification database, QY22

Key features

• Output type: TRIAC output
• Number of output points: 16 points
• Rated load voltage, frequency: 100...240 V AC, 50/60 Hz ±5 %
• Maximum load current: 0.6 A/point, 4.8 A/common
• Load voltage distortion rate: Within 5 %

About the Mitsubishi Electric QY22

The Mitsubishi Electric QY22 is a MELSEC-Q output module. Mitsubishi Electric's overview: Triac output: 16 points, 100...240 V AC, 0.6 A/point, 4.8 A/common, response time: 1 ms + 0.5 cycles, 16 points/common, 18-point terminal block. Mitsubishi Electric names the RY20S6 as its replacement model.

What is the QY22 used for?

The QY22 mounts on a MELSEC-Q base unit and connects field signals to the CPU, which reads or writes them each cycle.

Lifecycle and successor

Phased out.

OEM successor: RY20S6

Before you order

What to photograph or confirm so the right unit is quoted.

Check the model name QY22 on the rating plate, with the serial number and function version. Send us a photo of the rating plate and we will confirm the details before quoting.