Mitsubishi Electric QY40P

Technical specifications

Manufacturer

Mitsubishi Electric

Manufacturer part no.

QY40P

Type

Digital output module

Application

I/O module

Used with

MELSEC-Q base units

Output type

Transistor output (sink type)

Number of output points

16 points

Rated load voltage

12...24 V DC (+20/-15 %)

Maximum load current

0.1 A/point, 1.6 A/common

Maximum inrush current

0.7 A, 10 ms or less

Leakage current at OFF

0.1 mA or less

Maximum voltage drop at ON

0.1 V DC (TYP.) 0.1 A, 0.2 V DC (MAX.) 0.1 A

Output response time, OFF to ON

1 ms or less

Output response time, ON to OFF

1 ms or less (rated load, resistive load)

Surge suppressor

Zener diode

Fuse

None

Protection function, Overheat protection function

Available

Protection function, Overload protection function

Available

External power supply, Voltage

12...24 V DC (+20/-15 %) (ripple ratio within 5 %)

External power supply, Current

Maximum 10 mA (at 24 V DC and all points ON)

Output common terminal arrangement

16 points/common

Isolation method

Photocoupler

Dielectric withstand voltage

560 V AC rms/3 cycles (altitude 2000 m)

Insulation resistance

10 MΩ or higher by insulation resistance tester

Protection degree

IP2X

Operation indication

ON indication (LED)

External interface,

18-point terminal block (M3 screw)

Number of occupied I/O points

16 points (I/O assignment: Output 16 points)

Internal current consumption (5 V DC)

65 mA (TYP. all points ON)

External dimensions, Height

98 mm

Technical documents (1)

• Mitsubishi Electric specification database, QY40P

Key features

• Output type: Transistor output (sink type)
• Number of output points: 16 points
• Rated load voltage: 12...24 V DC (+20/-15 %)
• Maximum load current: 0.1 A/point, 1.6 A/common
• Maximum inrush current: 0.7 A, 10 ms or less

About the Mitsubishi Electric QY40P

The Mitsubishi Electric QY40P is a MELSEC-Q output module. Mitsubishi Electric's overview: Transistor output: 16 points, 12...24 V DC, 0.1 A/point, 1.6 A/common, response time: 1 ms, 16 points/common, sink type, 18-point terminal block. Mitsubishi Electric names the RY40NT5P as its replacement model.

What is the QY40P used for?

The QY40P mounts on a MELSEC-Q base unit and connects field signals to the CPU, which reads or writes them each cycle.

Lifecycle and successor

Phased out.

OEM successor: RY40NT5P

Before you order

What to photograph or confirm so the right unit is quoted.

Check the model name QY40P on the rating plate, with the serial number and function version. Send us a photo of the rating plate and we will confirm the details before quoting.