Mitsubishi Electric QY51PL

Technical specifications

Manufacturer

Mitsubishi Electric

Manufacturer part no.

QY51PL

Type

Digital output module

Application

I/O module

Used with

MELSEC-Q base units

Output type

Transistor output (sink type)

Number of output points

32 points

Rated load voltage

12...24 V DC (+20/-15 %)

Maximum load current

0.5 A/point, 4 A/common

Maximum inrush current

Current is limited by the overload protection function.

Leakage current at OFF

0.1 mA or less

Maximum voltage drop at ON

0.2 V DC (TYP.) 0.5 A, 0.3 V DC (MAX.) 0.5 A

Output response time, OFF to ON

0.5 ms or less

Output response time, ON to OFF

1 ms or less (rated load, resistive load)

Surge suppressor

Zener diode

Fuse

None

Protection function, Overheat protection function

Available

Protection function, Overload protection function

Available

External power supply, Voltage

12...24 V DC (+20/-15 %) (ripple ratio within 5 %)

External power supply, Current

8 mA/common (at 24 V DC and all points ON)

Output common terminal arrangement

16 points/common

Isolation method

Photocoupler

Dielectric withstand voltage

560 V AC rms/3 cycles (altitude 2000 m)

Insulation resistance

10 MΩ or higher by insulation resistance tester

Operation indication

ON indication (LED)

External interface,

38-point terminal block connector (terminal block is sold separately)

Number of occupied I/O points

32 points (I/O assignment: Output 32 points)

Internal current consumption (5 V DC)

100 mA (TYP. all points ON)

External dimensions, Height

220 mm

External dimensions, Width

37.5 mm

Technical documents (1)

• Mitsubishi Electric specification database, QY51PL

Key features

• Output type: Transistor output (sink type)
• Number of output points: 32 points
• Rated load voltage: 12...24 V DC (+20/-15 %)
• Maximum load current: 0.5 A/point, 4 A/common
• Maximum inrush current: Current is limited by the overload protection function.

About the Mitsubishi Electric QY51PL

The Mitsubishi Electric QY51PL is a MELSEC-Q output module. Mitsubishi Electric's overview: Transistor output: 32 points, 12...24 V DC, 0.5 A/point, 4 A/common, response time: 1 ms, 16 points/common, sink type, 18-point terminal block connector (terminal block sold separately), replacement model: AY41, AY41P, AY51, AY51-S1.

What is the QY51PL used for?

The QY51PL mounts on a MELSEC-Q base unit and connects field signals to the CPU, which reads or writes them each cycle.

Lifecycle and successor

Phased out.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the model name QY51PL on the rating plate, with the serial number and function version. Send us a photo of the rating plate and we will confirm the details before quoting.