Mitsubishi Electric QY80-TS

Technical specifications

Manufacturer

Mitsubishi Electric

Manufacturer part no.

QY80-TS

Type

Digital output module

Application

I/O module

Used with

MELSEC-Q base units

Output type

Transistor output (source type)

Number of output points

16 points

Rated load voltage

12...24 V DC (+20/-15 %)

Maximum load current

0.5 A/point, 4 A/common

Maximum inrush current

4 A, 10 ms or less

Leakage current at OFF

0.1 mA or less

Maximum voltage drop at ON

0.2 V DC (TYP.) 0.5 A, 0.3 V DC (MAX.) 0.5 A

Output response time, OFF to ON

1 ms or less

Output response time, ON to OFF

1 ms or less (rated load, resistive load)

Surge suppressor

Zener diode

Fuse

6.7 A (Not replaceable) (Fuse capacity: 50 A)

Fuse blown indicator

Provided (when a fuse blows, LED turns on and a signal is output to the CPU module.)

External power supply, Voltage

12...24 V DC (+20/-15 %) (ripple ratio within 5 %)

External power supply, Current

20 mA (at 24 V DC)

Output common terminal arrangement

16 points/common

Isolation method

Photocoupler

Dielectric withstand voltage

560 V AC rms/3 cycles (altitude 2000 m)

Insulation resistance

10 MΩ or higher by insulation resistance tester

Protection degree

IP2X

Operation indication

ON indication (LED)

External interface,

18-point two-piece spring clamp terminal block

Number of occupied I/O points

16 points (I/O assignment: Output 16 points)

Internal current consumption (5 V DC)

80 mA (TYP. all points ON)

External dimensions, Height

98 mm

External dimensions, Width

27.4 mm

Technical documents (1)

• Mitsubishi Electric specification database, QY80-TS

Key features

• Output type: Transistor output (source type)
• Number of output points: 16 points
• Rated load voltage: 12...24 V DC (+20/-15 %)
• Maximum load current: 0.5 A/point, 4 A/common
• Maximum inrush current: 4 A, 10 ms or less

About the Mitsubishi Electric QY80-TS

The Mitsubishi Electric QY80-TS is a MELSEC-Q output module. Mitsubishi Electric's overview: Transistor output: 16 points, 12...24 V DC, 0.5 A/point, 4 A/common, response time: 1 ms, 16 points/common, source type, 18-point spring-clamp terminal block with indicators. Mitsubishi Electric names the RY40PT5P as its replacement model.

What is the QY80-TS used for?

The QY80-TS mounts on a MELSEC-Q base unit and connects field signals to the CPU, which reads or writes them each cycle.

Lifecycle and successor

Phased out.

OEM successor: RY40PT5P

Before you order

What to photograph or confirm so the right unit is quoted.

Check the model name QY80-TS on the rating plate, with the serial number and function version. Send us a photo of the rating plate and we will confirm the details before quoting.