Mitsubishi Electric RY40PT5B

Technical specifications

Manufacturer

Mitsubishi Electric

Manufacturer part no.

RY40PT5B

Type

Digital output module

Application

I/O module

Used with

MELSEC iQ-R base units

Output type

Transistor output (source type)

Number of output points

16 points

Rated load voltage

24 V DC (allowable voltage range: 20.4...28.8 V DC)

Maximum load current

0.5 A/point, 5 A/common

Maximum inrush current

Current is limited by the overload protection function.

Leakage current at OFF

0.3 mA or less

Maximum voltage drop at ON

1.0 V DC (TYP.) 0.5 A

Output response time, OFF to ON

0.5 ms or less

Output response time, ON to OFF

1.5 ms or less

Input short-circuit (ground) detection current

0.5 A or more/point

Disconnection (no connection) detection current

3 mA or less/point

Surge suppressor

Zener diode

Fuse

None

Protection function, Overheat protection function

Activated in increments of 1 point.

Protection function, Overload protection function

Limit current with overload protection at overcurrent detection: 1.0 A or more/point; Activated in increments of 1 point.

External power supply, Voltage

24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC)

External power supply, Current

87 mA (at 24 V DC)

Output common terminal arrangement

16 points/common

Control cycle time

2 ms

Dielectric withstand voltage

510 V AC rms for 1 minute

Insulation resistance

10 MΩ or higher by insulation resistance tester

Protection degree

IP2X

External interface,

18-point terminal block (M3 screw)

Number of occupied I/O points

32 points (I/O assignment: Output 32 points)

Internal current consumption (5 V DC)

190 mA (TYP. all points ON)

Technical documents (1)

• Mitsubishi Electric specification database, RY40PT5B

Key features

• Output type: Transistor output (source type)
• Number of output points: 16 points
• Rated load voltage: 24 V DC (allowable voltage range: 20.4...28.8 V DC)
• Maximum load current: 0.5 A/point, 5 A/common
• Maximum inrush current: Current is limited by the overload protection function.

About the Mitsubishi Electric RY40PT5B

The Mitsubishi Electric RY40PT5B is a MELSEC iQ-R output module. Mitsubishi Electric's overview: Transistor output: 16 points, 24 V DC, 0.5 A/point, 5 A/common, response time: 1.5 ms, 16 points/common, source type, 18-point terminal block. Mitsubishi Electric lists it as on sale.

What is the RY40PT5B used for?

The RY40PT5B mounts on a MELSEC iQ-R base unit and connects field signals to the CPU, which reads or writes them each cycle.

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the model name RY40PT5B on the rating plate, with the serial number and function version. Send us a photo of the rating plate and we will confirm the details before quoting.