Mitsubishi Electric RY48PT20S-TS

Technical specifications

Manufacturer

Mitsubishi Electric

Manufacturer part no.

RY48PT20S-TS

Type

Digital output module

Application

I/O module

Used with

MELSEC iQ-R base units

Double output type

Source + Source type

Number of output points

8 points (single wiring); 4 points (double wiring)

Rated load voltage

24 V DC (ripple ratio: 5 % or less) (allowable voltage range: 20.4...28.8 V DC)

Maximum load current

2 A/point, 16 A/common

Maximum inrush current

Current is limited by the overload protection function.

Leakage current at OFF

0.1 mA or less

Maximum voltage drop at ON

DC 1.0 V

Surge suppressor

Zener diode

Protection function,

Output overload protection function

Output circuit response time, OFF to ON

0.4 ms or less (at 24 V DC)

Output circuit response time, ON to OFF

0.4 ms or less (at 24 V DC)

Output reflection processing time

Output circuit response time

External power supply, Voltage

24 V DC (ripple ratio: within 5 %) (allowable voltage range: 20.4...28.8 V DC)

External power supply, Current

59 mA (at 24 V DC)

External power supply, Protection function

External power supply overvoltage protection function

Output common terminal arrangement

8 points/common

Safety cycle time

2 ms

Dielectric withstand voltage

510 V AC for 1 minute

Insulation resistance

10 MΩ or higher by insulation resistance tester

Noise immunity

Simulator noise 500 Vp-p, noise width 1 µs, noise frequency 25...60 Hz (noise simulator condition)

Protection degree

IP2X

External interface,

40 point 2-piece spring clamp terminal block

Number of occupied I/O points

32 points (I/O assignment: Output 16 points)

Internal current consumption (5 V DC)

250 mA (TYP. all points ON)

Safety element

Type B, HFT = 1, SC3

Technical documents (1)

• Mitsubishi Electric specification database, RY48PT20S-TS

Key features

• Double output type: Source + Source type
• Number of output points: 8 points (single wiring); 4 points (double wiring)
• Maximum load current: 2 A/point, 16 A/common
• Maximum inrush current: Current is limited by the overload protection function.
• Leakage current at OFF: 0.1 mA or less

About the Mitsubishi Electric RY48PT20S-TS

The Mitsubishi Electric RY48PT20S-TS is a MELSEC iQ-R output module. Mitsubishi Electric's overview: Single wiring: 8 points, double wiring: 4 points, 24 V DC (2 A/point, 16 A/common), source + source type, spring-clamp terminal block. Mitsubishi Electric lists it as on sale.

What is the RY48PT20S-TS used for?

The RY48PT20S-TS mounts on a MELSEC iQ-R base unit and connects field signals to the CPU, which reads or writes them each cycle.

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the model name RY48PT20S-TS on the rating plate, with the serial number and function version. Send us a photo of the rating plate and we will confirm the details before quoting.