Omron NX-ID5142-5

Technical specifications

Manufacturer

Omron

Manufacturer part no.

NX-ID5142-5

Type

Digital input module

Application

I/O module

Used with

NX-series controllers and NX bus couplers

I/O system

NX I/O Bus

Type of module

Digital I/O

Number of digital inputs

16

Digital input type

PNP/NPN

Permitted voltage at input

15-28.8 V

OFF/ON delay

0.02-0.4 ms

Connection method

1-wire

Signal processing

Free running, Standard speed, Synchronous

I/O connection type

MIL (plug not included)

Number of I/O connectors

1

Number of COM terminals

2

Degree of protection (IP)

IP20

Height

100 mm

Width

30 mm

Depth

89.52 mm

Weight

85 g

Technical documents (1)

• Omron product page NX-ID5142-5

Key features

• Signal processing: Free running, Standard speed, Synchronous
• OFF/ON delay: 0.02-0.4 ms
• Connection method: 1-wire
• Degree of protection (IP): IP20
• Number of I/O connectors: 1

About the Omron NX-ID5142-5

The Omron NX-ID5142-5 is an NX digital input unit. Omron describes it as: 16 Digital Inputs, Standard speed, NPN/PNP 24 VDC, MIL20 connector (not included), 30 mm wide. Its specification table gives 16 digital inputs, PNP/NPN inputs and 15-28.8 V input voltage. Omron's European product page carries no end-of-production notice for it.

What is the NX-ID5142-5 used for?

The NX-ID5142-5 slots onto the NX I/O bus next to an NX controller or bus coupler, carrying its digital input signals to and from the machine.

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the model number NX-ID5142-5 on the unit's label, with its lot number. Send us a photo of the label and we will confirm the details before quoting.