Schneider Electric 140DDO15310C

Technical specifications

Manufacturer

Schneider Electric

Manufacturer part no.

140DDO15310C

Type

Digital output module

Application

I/O module

Used with

Modicon Quantum 140XBP backplane

Range of product

Modicon Quantum automation platform

Product or component type

TTL discrete output module

Discrete output number

32

Group of channels

4 groups of 8 channels

Discrete output type

TTL; Positive (sink)

Addressing requirement

2 output words

Discrete output voltage

5 V DC

Voltage state 1 guaranteed

<= 0.2 V

[Us] rated supply voltage

4...5.5 V DC

Absolute maximum output

15 V for 0.0013 s decaying voltage pulse DC

Internal pullup resistor

440 Ohm

Maximum load current

<= 2.4 A per module; <= 600 mA each group; <= 75 mA each point

Surge current

750 A during 0.5 ms between each point

Response time

<= 250 µs at state 0 to state 1 resistive; <= 250 µs at state 1 to state 0 resistive

Protection type

Output protection by transient voltage suppression; Internal by fuse

Fault indication

Blown fuse; Loss of field power

Power dissipation

4 W

Maximum supply current

0.4 A

Isolation between group

500 Vrms for 1 minute

Marking

CE

Local signalling

1 LED (green) for bus communication is present (Active); 1 LED (red) for external fault detected (F); 32 LEDs (green) for input status

Bus current requirement

350 mA

Current consumption

2800 mA at 5 V DC

Module format

Standard

Net weight

0.45 kg

Technical documents (1)

• Schneider Electric product page 140DDO15310C

Key features

• Response time: <= 250 µs at state 0 to state 1 resistive
• Group of channels: 4 groups of 8 channels
• Protection type: Output protection by transient voltage suppression
• Local signalling: 1 LED (green) for bus communication is present (Active)
• Module format: Standard

About the Schneider Electric 140DDO15310C

The Schneider Electric 140DDO15310C is a TTL discrete output module from Schneider Electric's Modicon Quantum range, which Schneider names "Modicon Quantum TTL discrete output module - 32 O - positive logic - 2 words". Its product page gives 32 discrete outputs, 5 V DC output voltage, TTL outputs and 2800 mA at 5 V DC consumption. Schneider Electric lists it as discontinued since 31 Dec 2021, with end of service on 31 Dec 2029.

What is the 140DDO15310C used for?

The 140DDO15310C sits in a Modicon Quantum rack and connects field signals to the controller, which reads or writes them each cycle.

Lifecycle and successor

Discontinued.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the reference 140DDO15310C on the module's label, with its product version. Send us a photo of the label and we will confirm the details before quoting.