Schneider Electric 140DDO88500

Technical specifications

Manufacturer

Schneider Electric

Manufacturer part no.

140DDO88500

Type

Digital output module

Application

I/O module

Used with

Modicon Quantum 140XBP backplane

Range of product

Modicon Quantum automation platform

Product or component type

Dc discrete output module

Discrete output number

12

Group of channels

2 groups of 6

Discrete output logic

Negative logic (sink)

Addressing requirement

1 input word; 1 output word

Discrete output voltage

24...125 V DC

Output voltage limits

19.2...156.2 V

Maximum load current

<= 3 A at 0…60 °C each group; <= 6 A at 0…60 °C per module; <= 0.75 A at 0…40 °C each point

Surge current

4 A for 1 ms

Response time

1 ms at state 0 to state 1; 1 ms at state 1 to state 0

Short-circuit protection

With

Output overvoltage protection

By varistor per group

Load inductance

No limit (protected by diode)

Maximum tungsten load

41 W 115 V; 46 W 130 V; 8 W 24 V

Switching frequency

<= 50 Hz

Fault indication

Overcurrent

Isolation between channels and bus

2500 Vrms DC for 1 minute

Isolation between group

1200 Vrms DC for 1 minute

Protection type

Internal output protection by 4 A fuse

Power dissipation

1 W + (0.77 x all points on)

Marking

CE

Local signalling

1 LED (green) for bus communication is present (Active); 1 LED (red) for external fault detected (F); 16 LEDs (green) for input status

Bus current requirement

375 mA 6 outputs at state 1; 650 mA 12 outputs at state 1

Module format

Standard

Technical documents (1)

• Schneider Electric product page 140DDO88500

Key features

• Response time: 1 ms at state 0 to state 1
• Isolation between channels and bus: 2500 Vrms DC for 1 minute
• Group of channels: 2 groups of 6
• Protection type: Internal output protection by 4 A fuse
• Local signalling: 1 LED (green) for bus communication is present (Active)

About the Schneider Electric 140DDO88500

The Schneider Electric 140DDO88500 is a dc discrete output module from Schneider Electric's Modicon Quantum range, which Schneider names "discrete output module Modicon Quantum - 12 O - 24..125 V DC". Its product page gives 12 discrete outputs and 24...125 V DC output voltage.

What is the 140DDO88500 used for?

The 140DDO88500 sits in a Modicon Quantum rack and connects field signals to the controller, which reads or writes them each cycle.

Lifecycle and successor

Phased out.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the reference 140DDO88500 on the module's label, with its product version. Send us a photo of the label and we will confirm the details before quoting.