Schneider Electric 140DRC83000

Technical specifications

Manufacturer

Schneider Electric

Manufacturer part no.

140DRC83000

Type

Digital output module

Application

I/O module

Used with

Modicon Quantum 140XBP backplane

Range of product

Modicon Quantum automation platform

Product or component type

Relay discrete output module

Discrete output number

8

Contacts type and composition

1 NO/NC

Contact form

Form C

Discrete output voltage

20...250 V AC; 30...150 V DC; 5...30 V DC

Addressing requirement

0.5 output word

Maximum load current

100 mA 30...50 V DC L/R = 10 ms; 2 A 250/30 V AC/DC tungsten 1/4 hp cos phi = 0.4; 3 A 250/30 V AC/DC; 300 mA 30...50 V DC resistive; 5 A 250/30 V AC/DC resistive at 60 °C

Surge current

20 A for 10 ms capacitive

Switching frequency

30 Hz resistive load; F = 0.5/I²L inductive load

Switching capacity in VA

1250 VA resistive

Maximum response time on input open

10 ms at state 0 to state 1; 20 ms at state 1 to state 0

Mechanical durability

10000000 cycles

Electrical durability

100000 cycles 100 mA 30...150 V DC L/R = 10 ms; 100000 cycles 30...150 V DC interposing relay; 100000 cycles 300 mA 30...150 V DC resistive; 100000 cycles 5 A 30 V DC resistive; 200000 cycles 5 A 250 V AC resistive; 50000 cycles 500 mA 30...150 V DC resistive

Output overvoltage protection

Internal by varistor, 275 V

Isolation between channels

1780 Vrms AC for 1 minute; 2500 V DC

Isolation between channels and bus

1780 Vrms AC for 1 minute; 2500 V DC for 1 minute

Power dissipation

2.75 W + (0.5 x the number of points on)

Marking

CE

Local signalling

1 LED (green) for bus communication is present (Active); 1 LED (red) for external fault detected (F); 8 LEDs (green) for input status

Bus current requirement

560 mA

Module format

Standard

Net weight

0.3 kg

Product certifications

C-Tick; GOST; GL; RMRS; FM Class 1 Division 2; ABS; DNV; RINA

Standards

UL 508; CSA C22.2 No 142

Technical documents (1)

• Schneider Electric product page 140DRC83000

Key features

• Isolation between channels and bus: 1780 Vrms AC for 1 minute
• Local signalling: 1 LED (green) for bus communication is present (Active)
• Module format: Standard
• Power dissipation: 2.75 W + (0.5 x the number of points on)
• Net weight: 0.3 kg

About the Schneider Electric 140DRC83000

The Schneider Electric 140DRC83000 is a relay discrete output module from Schneider Electric's Modicon Quantum range, which Schneider names "relay discrete output module Modicon Quantum - 8 O". Its product page gives 8 discrete outputs and 20...250 V AC output voltage. Schneider Electric recommends the BMXDRC0805 as its replacement.

What is the 140DRC83000 used for?

The 140DRC83000 sits in a Modicon Quantum rack and connects field signals to the controller, which reads or writes them each cycle.

Lifecycle and successor

Phased out.

OEM successor: BMXDRC0805

Before you order

What to photograph or confirm so the right unit is quoted.

Check the reference 140DRC83000 on the module's label, with its product version. Send us a photo of the label and we will confirm the details before quoting.