Schneider Electric BMXDDI1604T

Technical specifications

Manufacturer

Schneider Electric

Manufacturer part no.

BMXDDI1604T

Type

Digital input module

Application

I/O module

Used with

Modicon M340 / X80 backplane

Range of product

Modicon X80

Product or component type

Discrete input module

Discrete input number

16

Discrete input voltage

125 V DC for isolated

Discrete input logic

Positive logic (sink)

Discrete input current

2.4 mA at 125 V DC

Voltage state 1 guaranteed

>= 88 V

Current state 1 guaranteed

>= 2 mA

Current state 0 guaranteed

<= 0.5 mA

Input impedance

50000 Ohm

Paralleling of inputs

Yes

Insulation resistance

> 10 MOhm 500 V DC

DC typical response time

5 ms

DC maximum response time

9 ms

Sensor power supply

: 100…150 V

Typical current consumption

76 mA DC

Current consumption

<= 107 mA at 3.3 V DC

Power dissipation in W

3.2 W; 5.0 W at 60 °C; 6.7 W at 50 °C; 8.5 W at 40 °C

Isolation between channels and bus

1500 V for 1 minute

Hot swapping fallback

Yes

MTBF reliability

888402 H

Voltage detection threshold

100 V DC sensor OK

Local signalling

1 LED (green) for module operating (RUN); 1 LED per channel (green) for channel diagnostic; 1 LED (red) for module error (ERR); 1 LED (red) for module I/O

Height

103.7 mm

Width

32 mm

Technical documents (1)

• Schneider Electric product page BMXDDI1604T

Key features

• Isolation between channels and bus: 1500 V for 1 minute
• Input impedance: 50000 Ohm
• Local signalling: 1 LED (green) for module operating (RUN)
• IP degree of protection: IP20
• Net weight: 0.115 kg

About the Schneider Electric BMXDDI1604T

The Schneider Electric BMXDDI1604T is a discrete input module from Schneider Electric's Modicon X80 range, which Schneider names "discrete input module X80 - 16 inputs - 125 V DC". Its product page gives 16 discrete inputs, 125 V DC for isolated input voltage and <= 107 mA at 3.3 V DC consumption. Schneider Electric lists it as Active.

What is the BMXDDI1604T used for?

The BMXDDI1604T sits in a Modicon X80 rack and connects field signals to the controller, which reads or writes them each cycle.

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the reference BMXDDI1604T on the module's label, with its product version. Send us a photo of the label and we will confirm the details before quoting.