Schneider Electric BMXDDI3232

Technical specifications

Manufacturer

Schneider Electric

Manufacturer part no.

BMXDDI3232

Type

Digital input module

Application

I/O module

Used with

Modicon M340 / X80 backplane

Range of product

Modicon X80

Product or component type

Discrete input module

Device application

Industrial application

Discrete input number

32

Discrete input voltage

12 V DC for isolated; 24 V DC for isolated

Discrete input logic

Positive logic (sink); Negative logic (source)

Input wiring mode

2 or 3 wires

Discrete input current

3.3 mA at 12 V DC; 3.3 mA at 24 V DC

Voltage state 1 guaranteed

>= 10 V; <= -10 V

Voltage state 0 guaranteed

= -5 V

Current state 1 guaranteed

>= 2 mA

Current state 0 guaranteed

<= 1.5 mA

Input impedance

7270 Ohm

Insulation resistance

> 10 MOhm 500 V DC

DC typical response time

4 ms

DC maximum response time

7 ms

Paralleling of outputs

Yes

Sensor power supply

: 19…30 V

Typical current consumption

100 mA at 3.3 V DC; 7.6 mA at 24 V DC

Current consumption

130 mA at 3.3 V DC; 11.5 mA at 24 V DC

Power dissipation in W

4.7 W

Isolation between channels and bus

1500 V for 1 minute

MTBF reliability

2200000 H

Voltage detection threshold

19 V DC sensor OK

Local signalling

1 LED (green) for module operating (RUN); 1 LED per channel (green) for channel diagnostic; 1 LED (red) for module error (ERR); 1 LED (red) for module I/O

Technical documents (1)

• Schneider Electric product page BMXDDI3232

Key features

• Isolation between channels and bus: 1500 V for 1 minute
• Input impedance: 7270 Ohm
• Local signalling: 1 LED (green) for module operating (RUN)
• IP degree of protection: IP20
• Net weight: 0.137 kg

About the Schneider Electric BMXDDI3232

The Schneider Electric BMXDDI3232 is a discrete input module from Schneider Electric's Modicon X80 range, which Schneider names "Discrete input module X80 - 32 inputs - 12/24 V DC positive/negative". Its product page gives 32 discrete inputs, 12 V DC for isolated input voltage and 130 mA at 3.3 V DC consumption. Schneider Electric lists it as Active.

What is the BMXDDI3232 used for?

The BMXDDI3232 sits in a Modicon X80 rack and connects field signals to the controller, which reads or writes them each cycle.

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the reference BMXDDI3232 on the module's label, with its product version. Send us a photo of the label and we will confirm the details before quoting.