Schneider Electric TSXCTY2C

Technical specifications

Manufacturer

Schneider Electric

Manufacturer part no.

TSXCTY2C

Type

Counter module

Application

I/O module

Used with

Modicon Premium TSXRKY rack

Range of product

Modicon Premium Automation platform

Product or component type

Measurement and counter module

I/O modularity

2 channels

Electrical circuit type

Auxiliary output conforming to EN/IEC 61131-2

Counting frequency

1000000 Hz

Incremental encoder frequency x1

500 kHz

Incremental encoder frequency x 4

250 kHz

Power dissipation in W

7…10 W

Cycle time

1 ms

Discrete input logic

Current sink for auxiliary input (preset, enable and read) conforming to IEC 1131 Type 2; Resistive for 2/3-wire proximity sensors PNP/NPN conforming to IEC 1131 Type 2; Resistive for encoder input

Input logic

Positive

Input compatibility

Absolute encoder parallel output ABE7CPA11; Incremental encoder 10...30 V totem pole; Incremental encoder 5 V DC RS422; Absolute encoder SSI serial output

Input voltage

24 V 16 mA 2/3-wire proximity sensors PNP/NPN; 24 V 8 mA auxiliary input (preset, enable and read); 5 V 18 mA encoder input

Input voltage limits

<= 5.5 V encoder input; 19...30 V 2/3-wire proximity sensors PNP/NPN; 19...30 V auxiliary input (preset, enable and read)

Voltage state 1 guaranteed

>= 11 V for 2/3-wire proximity sensors PNP/NPN; >= 11 V for auxiliary input (preset, enable and read); >= 2.4 V for encoder input

Current state 1 guaranteed

>= 6 mA (2/3-wire proximity sensors PNP/NPN); >= 6 mA (auxiliary input (preset, enable and read)); >= 3.6 mA (encoder input)

Voltage state 0 guaranteed

<= 1.2 V for encoder input; <= 5 V for 2/3-wire proximity sensors PNP/NPN; <= 5 V for auxiliary input (preset, enable and read)

Current state 0 guaranteed

<= 1 mA (encoder input); <= 2 mA (2/3-wire proximity sensors PNP/NPN); <= 2 mA (auxiliary input (preset, enable and read))

Response time

< 10 ms sensor voltage at return of 24 V auxiliary input (preset, enable and read); < 2.5 ms sensor voltage at loss of 24 V auxiliary input (preset, enable and read)

Input impedance

Encoder input: > 270 Ohm at U = 2.4 V; 2/3-wire proximity sensors PNP/NPN: 1500 Ohm at Un; Auxiliary input (preset, enable and read): 3400 Ohm at Un; Encoder input: 400 Ohm at Un

Output voltage

24 V DC

nominal output current

0.5 A

Output voltage limits

19...30 V

Maximum voltage drop

<0.5 V at state 1

Output compatibility

Positive logic DC inputs (resistance <= 15 kOhm) for auxiliary output

Technical documents (1)

• Schneider Electric product page TSXCTY2C

Key features

• Input impedance: Encoder input: > 270 Ohm at U = 2.4 V
• Local signalling: 1 LED (green) for module operating (RUN)
• Module format: Standard
• Net weight: 0.34 kg

About the Schneider Electric TSXCTY2C

The Schneider Electric TSXCTY2C is a measurement and counter module from Schneider Electric's Modicon Premium range, which Schneider names "2 channels measurement and counter module - 15 mA at 24 V DC, 850 mA at 5 V DC". Its product page gives 1 connector HE-10, 20 pins and 15 mA at 24 V DC consumption. Schneider Electric lists it as discontinued since 31 Dec 2018, with end of service on 31 Dec 2027.

What is the TSXCTY2C used for?

The TSXCTY2C sits in a Modicon Premium rack and connects field signals to the controller, which reads or writes them each cycle.

Lifecycle and successor

Discontinued.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the reference TSXCTY2C on the module's label, with its product version. Send us a photo of the label and we will confirm the details before quoting.