Allen-Bradley 800F-X01

Technical specifications

Manufacturer

Allen-Bradley

Manufacturer part no.

800F-X01

Type

Pushbutton contact block

Application

Operator control

Used with

800F 22 mm operators

Contact block configuration

1 NC

Contact block mounting style

Latch

Contact block operational voltage, max

600V (A600, Q600) - screw termination

Contact block termination tightening torque

6 - 8 in-lb / 0.7 - 0.9 N-m

Contact block termination wire range

#18...12 AWG (0.75...2.5 mm²)

Contact block thermal current rating

10 A

Contact block type

Standard

Contact block utilization category (AC)

A600, AC 15 - screw termination

Contact block utilization category (DC)

Q600, DC-13 - screw termination

Humidity

≤95% RH from 25...60 °C (77...140 °F)

Latch material

Plastic / metal

Number of contacts as normally closed contact

1

Operator mounting hole dimension

22.5 mm

Packaging

Standard pack (1 per package)

Shock

100 g

Termination style

Screw

Vibration

10 g

Technical documents (1)

• Rockwell Automation product page 800F-X01

Key features

• One normally closed contact, standard type
• Latch mounting with plastic and metal latch
• Screw termination for #18 to 12 AWG wire
• Utilization categories A600 (AC 15) and Q600 (DC-13)
• Fits a 22.5 mm operator mounting hole

About the Allen-Bradley 800F-X01

The 800F-X01 is a standard 22mm 800F contact block with one normally closed contact. It is rated 10 A thermal current and 600V maximum (A600, Q600), with screw termination. It takes #18 to 12 AWG (0.75 to 2.5 mm²) wire at a torque of 6 to 8 in-lb (0.7 to 0.9 N-m).

What is the 800F-X01 used for?

It latches onto an 800F push button, selector or pilot device in a 22.5 mm mounting hole and gives one normally closed contact, typically for a stop circuit. It is rated for the AC 15 (A600) and DC-13 (Q600) utilization categories.

Lifecycle and successor

Active (Rockwell Automation lifecycle status, checked 24 October 2026).

Before you order

What to photograph or confirm so the right unit is quoted.

Read the catalog number 800F-X01, the series letter and the firmware revision from the label. Send us a photo of the label and we confirm the match before we quote.