HARTING 09 33 016 2601

Technical specifications

Manufacturer

HARTING

Manufacturer part no.

09 33 016 2601

Type

Heavy-duty connector insert

Application

Heavy-duty machine and panel connectors

Used with

Han B size 16 B hoods and housings; Han E 16 female insert 09 33 016 2701

Category

Inserts

Series

Han E®

Termination method

Screw termination

Gender

Male

Size

16 B

With wire protection

Yes

Number of contacts

16

PE contact

Yes

Conductor cross-section (mm²)

0.75 ... 2.5 mm²

Conductor cross-section (AWG)

AWG 18 ... AWG 14

Rated voltage acc. to CSA

600 V

Rated current

16 A

Rated voltage

500 V

Rated impulse voltage

6 kV

Pollution degree

3

Rated voltage acc. to UL

600 V

Insulation resistance

> 10¹⁰ Ω

Contact resistance

≤ 1 mΩ

Limiting temperature

-40 ... +125 °C

Stripping length

7.5 mm

Tightening torque

0.5 Nm Contact screw M3; 0.5 Nm Fixing screws M3; 1.2 Nm PE screw M4

Recommended screw driver

Slotted 0.6 x 3.5; Slotted 0.8 x 4.5; PH2

Mating cycles

≥ 500

Material (insert)

Polycarbonate (PC)

Colour (insert)

RAL 7032 (pebble grey)

Technical documents (1)

• HARTING product page 09 33 016 2601

Key features

• 16 pin contacts plus a PE contact
• Screw termination, 0.75 to 2.5 mm² (AWG 18 to 14)
• 16 A, 500 V, 6 kV rated impulse voltage
• Silver-plated copper alloy contacts in a polycarbonate insert
• DNV GL approval; UL and CSA 600 V

About the HARTING 09 33 016 2601

The HARTING 09 33 016 2601 is the male (pin) insert of a Han E 16 connector. What sets it apart from the 6-pole 09 33 006 2601 is size: 16 contacts plus PE in a size 16 B insert, weighing 82.5 g. The ratings are the same, 16 A and 500 V (600 V to UL and CSA), with screw clamps for 0.75 to 2.5 mm² wire. It mates with the female insert 09 33 016 2701 and fits a size 16 B Han B hood or housing, such as the 09 30 016 0301 bulkhead housing.

What is the 09 33 016 2601 used for?

It carries up to 16 power and control circuits through one connector, for example between the modules of a machine or from a control panel to a motor group.

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

HARTING prints the article number 09 33 016 2601 on the insert. Check the pole count (16), the male version and screw termination before ordering.