Kongsberg 8100184 PSS

Technical specifications

Manufacturer

Kongsberg

Manufacturer part no.

8100184

Type

Network / controller

Application

Marine alarm, monitoring, PMS or propulsion system

Used with

Kongsberg K-Chief 500

Module

PSS Process Segment Starcoupler

Function

Splits a CAN process segment into protected sections

CAN interfaces

8 channels, ISO 11898 high speed, optically isolated

Max. CAN segment length

530 m at 125 kBaud; 515 m through a starcoupler

Configuration

None required; not seen by the alarm system software

Supply voltage

18 to 32 VDC

Power consumption

4 W nominal, 5 W maximum

Operating temperature

-15 °C to +70 °C

Storage temperature

-25 °C to +70 °C

Max. relative humidity

96%, non-condensing

Mechanical environment

DNV class B, IACS E10 (direct mounting on engines and compressors)

EMC

IACS E10, EN 60945

Isolation

Power fully isolated (DC/DC); CAN fully isolated (opto-coupler)

Weight

1 kg

Mounting

4 x M5 screws

Type approvals

DNV, LRS, BV, GL, RINA, NK, ABS, KR, PRS, MRS, CCS

Technical documents (1)

• Kongsberg general description AD-0327 (PSS)

Key features

• Protects sections of one CAN segment from each other
• Stops a short circuit or broken line taking down the whole segment
• Typical use: CAN segments that cross fire or flood zones
• 8 optically isolated CAN channels
• No configuration and no serviceable parts
• Pluggable screw terminals

About the Kongsberg 8100184

The Kongsberg 8100184 is the PSS Process Segment Starcoupler, a CAN bus module from Kongsberg's distributed alarm and control systems. On a CAN process segment, one short circuit or broken line can disable every unit on that segment; the PSS splits the segment into sections and isolates each of its 8 CAN terminals optically, so a fault on one section does not affect the others. It needs no configuration and is not seen by the alarm system software.

What is the 8100184 used for?

The PSS is typically fitted where a process segment runs through a fire or flood zone, or where the total cable run is longer than one CAN segment allows. It is installed in the CAN process segment between the distributed processing units and the dual Process Segment Controller (dPSC), on Kongsberg installations such as K-Chief 500.

Lifecycle and successor

Legacy.

OEM successor: K-Chief lifecycle upgrade or retrofit, depending on the system

Before you order

What to photograph or confirm so the right unit is quoted.

Check the item number 8100184 and the PSS marking on the module label. Send a label photo and the system it is installed in.