Mitsubishi Electric R60AD6-DG

Technical specifications

Manufacturer

Mitsubishi Electric

Manufacturer part no.

R60AD6-DG

Type

Analog input module

Application

I/O module

Used with

MELSEC iQ-R base units

Number of analog input points

6 points (6 channels)

Analog input, Current

With 2-wire transmitter: 4...20 mA DC (input resistance 250 Ω); Without 2-wire transmitter: 0...20 mA DC (input resistance 250 Ω)

Power supply part for 2-wire transmitter, Supply voltage

26 ±2 V DC

Power supply part for 2-wire transmitter, Maximum supply current

24 mA DC

Power supply part for 2-wire transmitter, Short-circuit protection

Available; Limit current: 25...35 mA

Power supply part for 2-wire transmitter, Check terminals

Available

Digital output

16-bit signed binary value (-32768...32767)

I/O characteristics, resolution, Input range

Digital output value (resolution)

I/O characteristics, resolution, Current input, 0...20 mA

0...32000 (625.0 nA)

I/O characteristics, resolution, Current input, 4...20 mA

0...32000 (500.0 nA)

I/O characteristics, resolution, Current input, 4...20 mA (extended mode)

-8000...32767 (500.0 nA)

I/O characteristics, resolution, Current input, User range setting

0...32000 (466.0 nA)

Accuracy (accuracy relative to maximum value of the digital output value), Reference accuracy

Within ±0.1 %

Accuracy (accuracy relative to maximum value of the digital output value), Temperature coefficient

±35 ppm/˚C (0.0035 %/˚C)

Conversion speed

10 ms/channel

Response time

20 ms

Absolute maximum input,

-22 mA/+35 mA

Isolation method

Between I/O terminals and programmable controller power supply, between analog input channels, between external power supply and analog input: Transformer

Dielectric withstand voltage

Between I/O terminals and programmable controller power supply: 500 V AC rms for 1 minute; Between analog input channels: 1000 V AC rms for 1 minute; Between external power supply and analog input: 500 V AC rms for 1 minute

Insulation resistance

Between I/O terminals and programmable controller power supply, between analog input channels, between external power supply and analog input: 500 V DC, 10 MΩ or higher

External power supply, Voltage

24 V DC (+20/-15 %, ripple, spike 500 mVp-p or lower)

External power supply, Current

0.27 A (inrush current: 5.5 A, 550 µs or lower)

External interface,

40-pin connector

External interface, Applicable connector

A6CON1, A6CON2, A6CON4 (sold separately)

Number of occupied I/O points

16 points (I/O assignment: Intelligent 16 points)

Technical documents (1)

• Mitsubishi Electric specification database, R60AD6-DG

Key features

• Number of analog input points: 6 points (6 channels)
• Power supply part for 2-wire transmitter, Supply voltage: 26 ±2 V DC
• Power supply part for 2-wire transmitter, Maximum supply current: 24 mA DC
• Power supply part for 2-wire transmitter, Short-circuit protection: Available; Limit current: 25...35 mA
• Power supply part for 2-wire transmitter, Check terminals: Available

About the Mitsubishi Electric R60AD6-DG

The Mitsubishi Electric R60AD6-DG is a MELSEC iQ-R analogue input module. Mitsubishi Electric's overview: 6 channels, input: 0...20 mA/4...20 mA, output (resolution): 0...32000, conversion speed: 10 ms/channel, 40-pin connector, channel isolated, power supply to 2-wire transmitter. Mitsubishi Electric lists it as on sale.

What is the R60AD6-DG used for?

The R60AD6-DG mounts on a MELSEC iQ-R base unit and connects field signals to the CPU, which reads or writes them each cycle.

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the model name R60AD6-DG on the rating plate, with the serial number and function version. Send us a photo of the rating plate and we will confirm the details before quoting.