Mitsubishi Electric R60DAH4

Technical specifications

Manufacturer

Mitsubishi Electric

Manufacturer part no.

R60DAH4

Type

Analog output module

Application

I/O module

Used with

MELSEC iQ-R base units

Number of analog output points

4 points (4 channels)

Digital input

16-bit signed binary value (-32768...32767)

Analog output, Voltage

-10...10 V DC (external load resistance 1 kΩ or more) ; 0...5 V DC (external load resistance 500 Ω or more)

Analog output, Current

0...20 mA DC (external load resistance 50...600 Ω)

I/O characteristics, resolution, Output range

Digital input value (resolution)

I/O characteristics, resolution, Voltage output, 0...5 V

0...32000 (156.3 µV)

I/O characteristics, resolution, Voltage output, 1...5 V

0...32000 (125.0 µV)

I/O characteristics, resolution, Voltage output, -10...10 V

-32000...32000 (312.5 µV)

I/O characteristics, resolution, Voltage output, User range setting

-32000...32000 (312.5 µV)

I/O characteristics, resolution, Current output, 0...20 mA

0...32000 (625.0 nA)

I/O characteristics, resolution, Current output, 4...20 mA

0...32000 (500.0 nA)

I/O characteristics, resolution, Current output, User range setting

-32000...32000 (360.0 nA)

Accuracy (accuracy of the maximum analog output value), Ambient temperature: 25±5 ﾟC

Within ±0.1 %

Accuracy (accuracy of the maximum analog output value), Ambient temperature: 0...55 ﾟC

Within ±0.3 %

D/A conversion speed

High speed output mode: 1 µs/channel; Normal output mode: 10 µs/channel; Wave output mode: 20 µs/channel

Output response time, Voltage output

Maximum 20 µs (-10...10 V, 2 kΩ load)

Output response time, Current output

Maximum 10 µs (0...20 mA, 250 Ω load)

Output short protection

Protected

Isolation method

Between I/O terminals and programmable controller power supply: Photocoupler; Between output channels: Non-isolation; Between external power supply and analog outputs: Transformer

Dielectric withstand voltage

Between I/O terminals and programmable controller power supply: 500 V AC rms for 1 minute; Between external power supply and analog outputs: 500 V AC rms for 1 minute

Insulation resistance

Between I/O terminals and programmable controller power supply: 500 V DC 10 MΩ or higher

External power supply, Voltage

24 V DC (+20/-15 %, ripple, spike 500 mVp-p or lower)

External power supply, Current

0.13 A (inrush current: 5.8 A, 700 µs or lower)

External interface,

18-point terminal block (M3 screw)

Number of occupied I/O points

16 points (I/O assignment: Intelligent 16 points)

Technical documents (1)

• Mitsubishi Electric specification database, R60DAH4

Key features

• Number of analog output points: 4 points (4 channels)
• Digital input: 16-bit signed binary value (-32768...32767)
• Analog output, Current: 0...20 mA DC (external load resistance 50...600 Ω)
• I/O characteristics, resolution, Output range: Digital input value (resolution)
• I/O characteristics, resolution, Voltage output, 0...5 V: 0...32000 (156.3 µV)

About the Mitsubishi Electric R60DAH4

The Mitsubishi Electric R60DAH4 is a MELSEC iQ-R analogue output module. Mitsubishi Electric's overview: 4 channels, I/O (resolution): 0...3200, -3200...32000, output: -10...10 V DC, 0...20 mA DC, conversion speed (high-speed output mode): 1 μs/channel, conversion speed (normal output mode): 10 μs/channel, conversion speed (waveform output mode): 20 μs/channel, 18-point terminal block. Mitsubishi Electric lists it as on sale.

What is the R60DAH4 used for?

The R60DAH4 mounts on a MELSEC iQ-R base unit and connects field signals to the CPU, which reads or writes them each cycle.

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the model name R60DAH4 on the rating plate, with the serial number and function version. Send us a photo of the rating plate and we will confirm the details before quoting.