Mitsubishi Electric R60ADI8-HA

Technical specifications

Manufacturer

Mitsubishi Electric

Manufacturer part no.

R60ADI8-HA

Type

Analog input module

Application

I/O module

Used with

MELSEC iQ-R base units

Number of analog input points

8 points (8 channels)

Analog input, Current

0...20 mA DC (input resistance 250 Ω)

Power supply part for external devices, Maximum supply current

24 mA DC

Power supply part for external devices, Short-circuit protection

Provided (limiting current: 25...40 mA)

Digital output

16-bit signed binary value (-32768...32767)

I/O characteristics, resolution, Input range

Digital output value (resolution)

I/O characteristics, resolution, Current input, 0...20 mA

0...32000 (625.0 nA)

I/O characteristics, resolution, Current input, 4...20 mA

0...32000 (500.0 nA)

I/O characteristics, resolution, Current input, 4...20 mA (extended mode)

-8000...32000 (500.0 nA)

Accuracy (accuracy relative to maximum value of the digital output value), Ambient temperature: 25±5 ﾟC

Within ±0.1 %

Accuracy (accuracy relative to maximum value of the digital output value), Ambient temperature: 0...55 ﾟC

Within ±0.3 %

Sampling cycle

80 ms/8 CH

Response time

400 ms

Absolute maximum input, Current

±30 mA

Isolation method

Between I/O terminals and programmable controller power supply: Photocoupler; Between input channels: Non-isolation

Dielectric withstand voltage

Between I/O terminals and programmable controller power supply: 500 V AC rms for 1 minute

Insulation resistance

Between I/O terminals and programmable controller power supply: 500 V DC 10 MΩ or higher

HART ® modem

FSK physical layer (multiplexed)

HART ® communication function

Protocol revision 7 supported; 4 process variables supported; FDT/DTM supported

External power supply, Voltage

24 V DC (+20/-15 %, ripple, spike 500 mVp-p or lower)

External power supply, Current

0.22 A (inrush current: 6.2 A, 430 µs or lower)

External interface,

40-point two-piece spring clamp terminal block (push-in)

Number of occupied I/O points

16 points (I/O assignment: Intelligent 16 points)

Internal current consumption (5 V DC)

0.17 A

External dimensions, Height

106 mm (base unit mounting side: 98 mm)

Technical documents (1)

• Mitsubishi Electric specification database, R60ADI8-HA

Key features

• Number of analog input points: 8 points (8 channels)
• Analog input, Current: 0...20 mA DC (input resistance 250 Ω)
• Power supply part for external devices, Maximum supply current: 24 mA DC
• Power supply part for external devices, Short-circuit protection: Provided (limiting current: 25...40 mA)
• Digital output: 16-bit signed binary value (-32768...32767)

About the Mitsubishi Electric R60ADI8-HA

The Mitsubishi Electric R60ADI8-HA is a MELSEC iQ-R analogue input module. Mitsubishi Electric's overview: 8 channels, input: 0...20 mA DC, output (resolution): 0...32000, conversion speed: 40-point 2-piece spring-clamp terminal block, HART communication supported. Mitsubishi Electric lists it as on sale.

What is the R60ADI8-HA used for?

The R60ADI8-HA mounts on a MELSEC iQ-R base unit and connects field signals to the CPU, which reads or writes them each cycle.

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the model name R60ADI8-HA on the rating plate, with the serial number and function version. Send us a photo of the rating plate and we will confirm the details before quoting.