Schneider Electric XPSBA5120

Technical specifications

Manufacturer

Schneider Electric

Manufacturer part no.

XPSBA5120

Type

Safety relay

Application

Safety relay

Used with

Machine safety circuits

Range of product

Preventa Safety automation

Product or component type

Preventa safety module

Safety module name

XPSBA

Safety module application

For electrical monitoring of two-hand control stations

Function of module

Monitoring two-hand control station

Safety level

Can reach PL c/category 1 conforming to EN/ISO 13849-1

Safety reliability data

MTTFd = 160.8 years conforming to EN/ISO 13849-1; PFHd = 7.1E-7 1/h conforming to EN/IEC 62061

Connections - terminals

Captive screw clamp terminals, 1 x 0.14...1 x 2.5 mm² flexible without cable end; Captive screw clamp terminals, 1 x 0.14...1 x 2.5 mm² solid without cable end; Captive screw clamp terminals, 1 x 0.25...1 x 1.5 mm² flexible with cable end, with bezel; Captive screw clamp terminals, 1 x 0.25...1 x 2.5 mm² flexible with cable end, without bezel; Captive screw clamp terminals, 2 x 0.14...2 x 0.75 mm² flexible without cable end; Captive screw clamp terminals, 2 x 0.14...2 x 0.75 mm² solid without cable end; Captive screw clamp terminals, 2 x 0.25...2 x 1 mm² flexible with cable end, without bezel; Captive screw clamp terminals, 2 x 0.5...2 x 1.5 mm² flexible with cable end, with double bezel

Output type

Relay, 1 NO circuit(s), volt-free

Number of additional circuits

1 NC

[Us] rated supply voltage

24 V AC - 20...10 %; 24 V DC - 20...20 %

Synchronisation time between inputs

0.5 s

Supply frequency

50/60 Hz

Power consumption in VA

20 VA

Input protection type

Internal, electronic

Number of inputs

1 NC + NO

Input voltage

18 V

Input current

30 mA

Input compatibility

Two-hand control conforming to EN 574/ISO 13851-III A

[Uc] control circuit voltage

24 V DC

Breaking capacity

180 VA holding AC-15 C300 relay output; 1800 VA inrush AC-15 C300 relay output

[Ith] conventional free air thermal current

5 A

Associated fuse rating

4 A gG for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200; 6 A fast blow for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200

Minimum output current

10 mA for relay output

Minimum output voltage

17 V for relay output

Technical documents (1)

• Schneider Electric product page XPSBA5120

Key features

• Monitors two-hand control stations to EN 574 type III A
• Synchronisation time between inputs 0.5 s
• 1 NO relay output, 1 NC additional circuit
• 35 mm DIN rail mounting
• 2 LEDs

About the Schneider Electric XPSBA5120

The Schneider Electric XPSBA5120 is a safety module from the Preventa safety automation range for two-hand control stations. Schneider Electric states it can reach PL c/category 1 to EN/ISO 13849-1, with one NO relay output and a 24 V AC or DC supply. Schneider Electric lists it as discontinued on 30 May 2014, and recommends the XPSUAB11CP as its replacement.

What is the XPSBA5120 used for?

The XPSBA5120 lets a press or similar machine start only when the operator presses both buttons of a two-hand station within 0.5 s of each other.

Lifecycle and successor

Discontinued.

OEM successor: XPSUAB11CP

Before you order

What to photograph or confirm so the right unit is quoted.

Check the reference XPSBA5120 on the module's rating label, with its product version. Send us a photo of the label and we will confirm the details before quoting.