Schneider Electric XPSECP5131

Technical specifications

Manufacturer

Schneider Electric

Manufacturer part no.

XPSECP5131

Type

Safety relay

Application

Safety relay

Used with

Machine safety circuits

Range of product

Preventa Safety automation

Product or component type

Preventa safety module

Safety module name

XPSECP

Safety module application

Increasing the number of safety contacts

Function of module

Increasing the number of safety contacts

Safety level

Can reach PL e/category 4 can reach the maximum safety level of module base conforming to EN/ISO 13849-1; Can reach SILCL 3 can reach the maximum safety level of module base conforming to EN/IEC 62061

Safety reliability data

MTTFd = 346.2 years conforming to EN/ISO 13849-1; DC = 0...90 % conforming to EN/ISO 13849-1; PFHd = 7.51E-9 1/h conforming to EN/IEC 62061

Output type

Relay, 8 NO circuit(s), volt-free

[Us] rated supply voltage

24 V AC - 20...10 %; 24 V DC - 20...20 %

Number of additional circuits

1 NC + 1 solid state output

Supply frequency

50/60 Hz

Power consumption in VA

5 VA

Input protection type

Internal, electronic

Breaking capacity

360 VA holding AC-15 B300 relay output; 3600 VA inrush AC-15 B300 relay output

Output thermal current

6 A per relay for relay output

[Ith] conventional free air thermal current

30 A for relay output

Associated fuse rating

6 A gG for relay output conforming to EN/IEC 60947-5-1, DIN VDE 0660 part 200

Minimum output current

10 mA for relay output

Minimum output voltage

17 V for relay output

Maximum response time on input open

20 ms

[Ui] rated insulation voltage

300 V (pollution degree 2) conforming to IEC 60947-5-1; 300 V (pollution degree 2) conforming to DIN VDE 0110 part 1

[Uimp] rated impulse withstand voltage

4 kV overvoltage category III conforming to IEC 60947-5-1; 4 kV overvoltage category III conforming to DIN VDE 0110 part 1

Local signalling

3 LEDs

Connections - terminals

Captive screw clamp terminals, 1 x 4 mm² without cable end; Captive screw clamp terminals, 2 x 2.5 mm² with cable end

Mounting support

35 mm symmetrical DIN rail

Technical documents (1)

• Schneider Electric product page XPSECP5131

Key features

• Increases the number of safety contacts
• 8 NO volt-free relay outputs
• 6 A per relay output
• 35 mm DIN rail mounting
• 3 LEDs

About the Schneider Electric XPSECP5131

The Schneider Electric XPSECP5131 is a module from the Preventa safety automation range that increases the number of safety contacts. Schneider Electric gives it eight NO relay outputs at 6 A per relay, and states it can reach PL e/category 4 and SILCL 3, up to the maximum safety level of its module base. Schneider Electric lists it as discontinued without giving a date.

What is the XPSECP5131 used for?

The XPSECP5131 is wired to a Preventa safety module when its own outputs are not enough, so one emergency-stop or guard circuit can switch more contactors.

Lifecycle and successor

Discontinued.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the reference XPSECP5131 on the module's rating label, with its product version. Send us a photo of the label and we will confirm the details before quoting.