1756-L84E

Technical specifications

Manufacturer

Allen-Bradley

Manufacturer part no.

1756-L84E

Type

ControlLogix controller

Application

PLC controller

Used with

ControlLogix 1756 chassis

Controller tasks

32 tasks, including a combination of one continuous, periodic, and event tasks 1000 programs/task

Built-in communication ports

1-port USB, Embedded Ethernet port

USB port communication

USB 2.0, Full speed (12 Mbps), Programming, configuration, firmware update, and online edits only

Ethernet performance

10/100/1000 Mbps

I/O Capacity (Class 0/1)

128,000 without CIP Security™ 40,000 with integrity 20,000 with integrity and confidentiality

Communication options

EtherNet/IP™, ControlNet®, DeviceNet®, Data Highway Plus™, Remote I/O, SERCOS, Third-party process and device networks

OPC UA nodes supported max

10,000 nodes

Network connections per network

ControlLogix 5580 Controllers front EtherNet/IP port. See ‘EtherNet/IP nodes supported, max’ in this table. 1000 I/O; 528 EtherNet/IP; 512 TCP (1756-EN4TR or variant rated for harsh environments) 256 EtherNet/IP; 128 TCP (1756-EN2x or variant rated for harsh environments) 128 EtherNet/IP; 64 TCP (1756-ENBT or variant rated for harsh environments) 100 ControlNet (1756-CN2/A or variant rated for harsh environments) 40 ControlNet (1756-CNB/D, 1756-CNB/E or variant rated for harsh environments) 128 ControlNet (1756-CN2/B or variant rated for harsh environments)

Integrated motion

SERCOS interface beginning with Studio 5000 Logix Designer® application version 31.00.01 or later, Analog options (encoder input, LDT input, SSI input) beginning with Studio 5000 Logix Designer application version 31.00.01 or later, Integrated Motion on the EtherNet/IP network

Controller redundancy

Full support with Studio 5000 Logix Designer application version 33.00.02 or later

Programming languages

Relay ladder logic (RLL), Structured text, Function Block Diagram, Sequential function chart (SFC)

Standard memory

20 MB

Digital I/O max

128,000

Analog I/O max

4000

Nonvolatile memory storage

4 GB Secure Digital (SD) card (1784-SD4), ships pre-installed in the controller

Energy storage module

Embedded in controller, non-removable

Number of power cycles

80,000

Current draw @ 1.2V DC

5.0 mA

Current draw @ 5.1V DC

1.20 A

Power dissipation

6.2 W

Thermal dissipation

21.2 BTU/hr

Isolation voltage

50V (continuous), Basic Insulation type, USB port to backplane, Ethernet port to backplane, and USB port to Ethernet port, Compliant and tested according to IEC/UL 61010-1

Weight approx

0.394 kg (.868 lb)

Slot width

1

Module location

Chassis-based, any slot

Technical documents (1)

• Rockwell Automation technical data 1756-TD001

Key features

• Embedded Ethernet port at 10/100/1000 Mbps
• USB 2.0 port for programming and firmware update
• 4 GB SD card ships pre-installed in the controller
• Ladder logic, structured text, function block and SFC programming
• Chassis-based module that fits any slot

About the Allen-Bradley 1756-L84E

The Allen-Bradley 1756-L84E is a ControlLogix 5580 Controller, which Rockwell Automation lists with an Active lifecycle status. Rockwell technical data 1756-TD001 gives 20 MB of standard memory, 32 tasks, 128,000 digital I/O maximum and 4000 analog I/O maximum. It has a USB port and an embedded Ethernet port, and Rockwell states that a 4 GB SD card (1784-SD4) ships pre-installed. It is a one-slot, chassis-based module that can be fitted in any slot.

What is the 1756-L84E used for?

The controller runs the control program in a ControlLogix chassis and communicates with I/O and devices over the networks Rockwell lists, including EtherNet/IP, ControlNet and DeviceNet. It is programmed in relay ladder logic, structured text, function block diagram or sequential function chart. Rockwell also lists integrated motion support, including Integrated Motion on the EtherNet/IP network.

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the catalog number 1756-L84E, the series letter and the firmware revision on the label. Send a photo of the label so we can confirm the part before you order.