6ES7332-5HF00-0AB0

Technical specifications

Manufacturer

Siemens

Manufacturer part no.

6ES7332-5HF00-0AB0

Type

Analog output module

Application

Analog output module

Used with

SIMATIC S7-300 rack (S7-300 backplane bus)

Product function / Isochronous mode

No

Load voltage L+ / Rated value (DC)

24 V

Load voltage L+ / Reverse polarity protection

Yes

Input current / from load voltage L+ (without load), max.

340 mA

Input current / from backplane bus 5 V DC, max.

100 mA

Power loss, typ.

6 W

Number of analog outputs

8

Analog outputs / Voltage output, short-circuit protection

Yes

Analog outputs / Voltage output, short-circuit current, max.

25 mA

Analog outputs / Current output, no-load voltage, max.

18 V

Output ranges, voltage / 0 to 10 V

Yes

Output ranges, voltage / 1 V to 5 V

Yes

Output ranges, voltage / -10 V to +10 V

Yes

Output ranges, current / 0 to 20 mA

Yes

Output ranges, current / -20 mA to +20 mA

Yes

Output ranges, current / 4 mA to 20 mA

Yes

Connection of actuators / for voltage output four-wire connection

Yes

Connection of actuators / for current output two-wire connection

Yes

Load impedance (in rated range of output) / with voltage outputs, min.

1 kΩ

Load impedance (in rated range of output) / with voltage outputs, capacitive load, max.

1 µF

Load impedance (in rated range of output) / with current outputs, max.

500 Ω

Load impedance (in rated range of output) / with current outputs, inductive load, max.

10 mH

Cable length / shielded, max.

200 m

Integration and conversion time/resolution per channel / Resolution with overrange (bit including sign), max.

12 bit; ±10 V, ±20 mA, 4 mA to 20 mA, 1 V to 5 V: 11 bit + sign; 0 V to 10 V, 0 mA to 20 mA: 12 bit

Integration and conversion time/resolution per channel / Conversion time (per channel)

0.8 ms

Technical documents (1)

• Siemens data sheet 6ES7332-5HF00-0AB0

Key features

• 8 analog outputs: 0-10 V, 1-5 V, ±10 V, 0-20 mA, ±20 mA, 4-20 mA
• Resolution 11 bit plus sign or 12 bit
• 0.8 ms conversion time per channel
• Diagnostics; isolated
• 40-pin front connector; hot-swappable with an active backplane bus
• Discontinued by Siemens on 1 October 2025; spare part only

About the Siemens 6ES7332-5HF00-0AB0

The Siemens 6ES7332-5HF00-0AB0 is the SM 332 analog output module with eight isolated outputs. Siemens's data sheet lists voltage ranges of 0 to 10 V, 1 to 5 V and ±10 V and current ranges of 0 to 20 mA, ±20 mA and 4 to 20 mA, a resolution of 11 bits plus sign or 12 bits, a conversion time of 0.8 ms per channel, diagnostics and a 40-pin front connector. Siemens's data sheet marks it as a spare part. Siemens names no direct successor for the order number; its route forward is migration to the S7-1500.

What is the 6ES7332-5HF00-0AB0 used for?

It sends set-points from an S7-300 to drives, control valves and positioners as 4-20 mA or voltage signals.

Lifecycle and successor

Discontinued: product cancellation (Siemens SiePortal), spare part only.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the order number on the module. The 40-pin front connector with the field wiring normally moves across to the replacement.