6ES7592-1AM00-0XB0

Technical specifications

Manufacturer

Siemens

Manufacturer part no.

6ES7592-1AM00-0XB0

Type

Front connector

Application

Front connector for S7-1500 modules

Used with

S7-1500 / ET 200MP modules 35 mm wide

Connection I/O signals / Connection method

Screw terminals

Connection I/O signals / Number of lines per connection

1; or combination of 2 conductors of up to 1.5 mm² (total) in a shared ferrule

Connection method / Connection I/O signals / Conductor cross-section in mm² / Connectable cable cross-sections for massive cables, min.

0.25 mm²; 1.5 mm²

Connection I/O signals / Conductor cross-section in mm² / Connectable cable cross-sections for flexible cables without end sleeve, min.

0.25 mm²

Connection I/O signals / Conductor cross-section in mm² / Connectable cable cross-sections for flexible cables without end sleeve, max.

1.5 mm²

Connection I/O signals / Conductor cross-section in mm² / Connectable cable cross-sections for flexible cables with end sleeve, min.

0.25 mm²

Connection I/O signals / Conductor cross-section in mm² / Connectable cable cross-sections for flexible cables with end sleeve, max.

1.5 mm²

Connection method / Connection I/O signals / Conductor cross-section acc. to AWG / Connectable cable cross-sections for massive cables, min.

24; 16

Connection I/O signals / Conductor cross-section acc. to AWG / Connectable cable cross-sections for flexible cables without end sleeve, min.

24

Connection I/O signals / Conductor cross-section acc. to AWG / Connectable cable cross-sections for flexible cables without end sleeve, max.

16

Connection I/O signals / Conductor cross-section acc. to AWG / Connectable cable cross-sections for flexible cables with end sleeve, min.

24

Connection I/O signals / Conductor cross-section acc. to AWG / Connectable cable cross-sections for flexible cables with end sleeve, max.

16

Connection I/O signals / Wire end processing / Stripped length of cables, min.

10 mm

Connection I/O signals / Wire end processing / Stripped length of cables, max.

11 mm

Connection I/O signals / Wire end processing / End sleeve acc. to DIN 46228 without plastic sleeve

Form A, 10 mm and 12 mm long

Connection I/O signals / Wire end processing / End sleeve acc. to DIN 46228 with plastic sleeve

Form E, 10 mm and 12 mm long

Connection I/O signals / Mounting / Tool

Screwdriver, conical design, 3 mm to 3.5 mm

Connection I/O signals / Mounting / Tightening torque, min.

0.4 N·m

Connection I/O signals / Mounting / Tightening torque, max.

0.7 N·m

Width

29.8 mm

Height

130.5 mm

Technical documents (1)

• Siemens data sheet 6ES7592-1AM00-0XB0

Key features

• 40-pole front connector for S7-1500 / ET 200MP modules 35 mm wide
• Screw terminals
• Conductors 0.25 to 1.5 mm² (AWG 24 to 16)
• Includes 4 potential bridges and cable ties

About the Siemens 6ES7592-1AM00-0XB0

The Siemens 6ES7592-1AM00-0XB0 is the 40-pole screw-terminal front connector for 35 mm wide S7-1500 and ET 200MP modules. Siemens's data sheet gives conductors of 0.25 to 1.5 mm² (AWG 24 to 16), and it comes with four potential bridges and cable ties. SiePortal lists it as an active product.

What is the 6ES7592-1AM00-0XB0 used for?

It carries the field wiring onto an S7-1500 I/O module. It is needed for every new module, or when a connector is damaged.

Lifecycle and successor

Active product (Siemens SiePortal).

Before you order

What to photograph or confirm so the right unit is quoted.

Check the module width (35 mm) and the terminal type (screw).