Deep Sea Electronics DSE5210

Technical specifications

Manufacturer

Deep Sea Electronics

Manufacturer part no.

DSE5210

Type

Auto start genset controller

Application

Genset controller

Used with

Diesel and gas generating sets; DSE5xxx expansion and communication modules

DC supply voltage, continuous

8 V to 35 V continuous

Cranking dropouts

Able to survive 0 V for 50 mS, providing the supply was at least 10 V before dropout and supply recovers to 5 V

Start relay output

16 A DC supply at supply voltage

Fuel relay output

16 A DC at supply voltage

Auxiliary relay outputs

5 A DC at supply voltage

Charge fail/excitation range

0 V to 35 V

Maximum operating current

320 mA at 12 V, 215 mA at 24 V

Maximum standby current

175 mA at 12 V, 95 mA at 24 V

Alternator input range

15 V (L-N) to 333 V AC (L-N) absolute maximum

Alternator input frequency

50-60 Hz at rated engine speed (Minimum: 15 V AC L-N)

Magnetic pick-up voltage input range

+/- 0.5 V to 70 V Peak

Magnetic input frequency

10,000 Hz (max) at rated engine speed

Module dimensions (W x H)

240 mm x 172 mm

Panel cut-out (W x H)

220 mm x 160 mm

Maximum panel thickness

8 mm

Technical documents (1)

• DSE data sheet DSE5210, DSE5220

Key features

• RS232 or RS485 link to a PC or building management system
• SMS messages to an engineer
• Start and fuel relay outputs rated 16 A DC
• Magnetic pick-up input up to 10,000 Hz
• Auxiliary relay outputs rated 5 A DC

About the Deep Sea Electronics DSE5210

The DSE5210 is the auto start module of DSE's DSE5210 and DSE5220 pair; the DSE5220 adds mains (utility) sensing and a loading relay output. DSE describes the DSE5210 for diesel and gas generating sets that include non electronic engines, and both modules include RS232 or RS485 communication for linking to a PC, sending SMS messages and building management systems. DSE's data sheet gives an 8 V to 35 V DC continuous supply, 16 A DC start and fuel relay outputs and a 220 mm x 160 mm panel cut-out. Deep Sea Electronics lists the DSE5210 as obsolete and names the DSE7310 MKII as its replacement; its notice 056-035 also names the DSE7410 MKII.

What is the DSE5210 used for?

The DSE5210 starts, runs and stops a generating set and protects the engine. Through its RS232 or RS485 port it can report alarms to a remote PC or a building management system.

Lifecycle and successor

Discontinued.

OEM successor: DSE7310 MKII

Before you order

What to photograph or confirm so the right unit is quoted.

Check the model number DSE5210 on the module's label. Send us a photo of the label and we will confirm the details before quoting.