Deep Sea Electronics DSE5110

Technical specifications

Manufacturer

Deep Sea Electronics

Manufacturer part no.

DSE5110

Type

Auto start genset controller

Application

Genset controller

Used with

Diesel and gas generating sets; DSE5xxx expansion and communication modules

DC supply voltage, continuous

8 V to 35 V continuous

Cranking dropouts

Able to survive 0 V for 50 mS, providing the supply was at least 10 V before dropout and supply recovers to 5 V

Start relay output

16 A DC supply at supply voltage

Fuel relay output

16 A DC at supply voltage

Auxiliary relay outputs

5 A DC at supply voltage

Charge fail/excitation range

0 V to 35 V

Maximum operating current

320 mA at 12 V, 215 mA at 24 V

Maximum standby current

175 mA at 12 V, 95 mA at 24 V

Alternator input range

15 V (L-N) to 333 V AC (L-N) absolute maximum

Alternator input frequency

50-60 Hz at rated engine speed (Minimum: 15 V AC L-N)

Magnetic pick-up voltage input range

+/- 0.5 V to 70 V Peak

Magnetic input frequency

10,000 Hz (max) at rated engine speed

Module dimensions (W x H)

240 mm x 172 mm

Panel cut-out (W x H)

220 mm x 160 mm

Maximum panel thickness

8 mm

Technical documents (1)

• DSE data sheet DSE5110, DSE5120

Key features

• Starts and stops the generating set automatically
• Start and fuel relay outputs rated 16 A DC
• Auxiliary relay outputs rated 5 A DC
• Magnetic pick-up input up to 10,000 Hz
• Faults shown on the LCD display and LEDs

About the Deep Sea Electronics DSE5110

The DSE5110 is the auto start module of DSE's DSE5110 and DSE5120 pair. DSE describes it as designed to automatically start and stop diesel and gas generating sets that include non electronic engines; its twin, the DSE5120, adds monitoring of a mains (utility) supply and its loading relay. On DSE's data sheet it runs from 8 V to 35 V DC continuous, has 16 A DC start and fuel relay outputs and 5 A DC auxiliary relay outputs, and fits a 220 mm x 160 mm panel cut-out. Deep Sea Electronics lists the DSE5110 as obsolete and names the DSE7310 MKII as its replacement.

What is the DSE5110 used for?

The DSE5110 starts, runs and stops a generating set and protects the engine. It reads the alternator voltage and frequency and a magnetic pick-up for engine speed, and shows faults on its LCD display and LEDs.

Lifecycle and successor

Discontinued.

OEM successor: DSE7310 MKII

Before you order

What to photograph or confirm so the right unit is quoted.

Check the model number DSE5110 on the module's label. Send us a photo of the label and we will confirm the details before quoting.