Kongsberg 333346 RIO-C2xe

Technical specifications

Manufacturer

Kongsberg

Manufacturer part no.

333346

Type

RIO-C2xe Remote Input/Output

Application

K-Chief 600 alarm, monitoring and control

Used with

Kongsberg K-Chief 600

Module

RIO-C2xe Remote Input/Output (distributed processing unit)

Digital inputs

8; dry contact, high- or low-side switch, or external 24 V

Digital outputs

8 relays; max. 3 A at 230 VAC / 32 VDC; max. inductive load cos φ = 0.5

Sensor excitation

6 mA at 24 VDC nominal

Control functions

Remote I/O, alarm system, engine start/stop and shutdown, standby pump logic, pump and valve remote control, built-in PLC

Power consumption

5 W, plus 0.5 W per output and 0.2 W per input

Communication

2 CAN ports, redundant CANopen field bus

Isolation

Inputs with external excitation individually isolated (opto-coupler); outputs isolated (relays); CAN ports individually isolated

Supply voltage

18 to 32 VDC

Operating temperature

-15 °C to +70 °C

Storage temperature

-25 °C to +70 °C

Max. relative humidity

96%, non-condensing

Protection

IP20

Environmental standards

IACS E10, IEC 60945

Vibration

4 g

Mounting

4 x M5 screws; directly on engines or compressors in a suitable cabinet

Weight

1.8 kg

Type approvals

DNV, LRS, BV, GL, RINA, NK, ABS, KR, PRS, RMR, CCS

Technical documents (1)

• Kongsberg datasheet 341338 (RIO-C2xe)

Key features

• 8 isolated digital inputs and 8 relay outputs in one module
• Electronic fuse per input, resets automatically
• Loadable functions: engine start/stop, shutdown, standby pumps
• Built-in PLC for project adaptation
• Can serve a Local Operator Station
• No trimmers or jumpers; parameters stored in the module

About the Kongsberg 333346

The Kongsberg 333346 is the RIO-C2xe, a combined remote input/output module of Kongsberg's K-Chief 600 automation system. It has 8 galvanically isolated digital inputs, each protected by a self-resetting electronic fuse, and 8 relay outputs, and can be loaded with control functions: diesel engine start/stop with slow-turning logic, engine shutdown, standby pump logic, remote control of pump starters and valves, and a built-in PLC for project-specific logic. It communicates over a redundant CANopen field bus.

What is the 333346 used for?

The RIO-C2xe is used where local control is needed as well as I/O, for example the start/stop and shutdown logic of a generator engine or the changeover of standby pumps. It is mounted near the equipment, in an engine-room cabinet or on the engine in a suitable enclosure, and can serve a Local Operator Station.

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the part number 333346 and the RIO-C2xe marking on the module label, with its revision; the functions loaded into it are part of the vessel's configuration. Send a label photo and the vessel name or IMO number.