Kongsberg 351792 RTixe

Technical specifications

Manufacturer

Kongsberg

Manufacturer part no.

351792

Type

RTixe Remote Torque Interface

Application

K-Chief 600 alarm, monitoring and control

Used with

Kongsberg K-Chief 600

Module

RTixe Remote Torque Interface (distributed processing unit)

Measures

Shaft torque and RPM; calculates shaft power; dual-channel measuring for two shafts

Analogue outputs

4 (torque, RPM, power, 1 spare); ±1/5/10 V (min. 5 kΩ) or ±5/10/20 mA (max. 550 Ω)

Serial output

RS-422 / RS-485

Calibration parameters

Shaft max. RPM, outer and inner diameter, max. power, steel properties

Power consumption

6 W, plus 300 mW per channel with current output

Communication

2 CAN ports, redundant CANopen field bus

Isolation

Power fully isolated (DC/DC); no isolation between channels; CAN fully isolated (opto-coupler)

Supply voltage

18 to 32 VDC

Operating temperature

-15 °C to +70 °C

Storage temperature

-25 °C to +70 °C

Max. relative humidity

96%, non-condensing

Protection

IP20

Environmental standards

IACS E10, IEC 60945

Vibration

4 g

Mounting

4 x M5 screws; directly on engines or compressors in a suitable cabinet

Weight

1.5 kg

Type approvals

Pending at datasheet issue: DNV, LRS, BV, GL, RINA, NK, ABS, KR, RMR, CCS

Technical documents (1)

• Kongsberg datasheet 350628 (RTixe)

Key features

• Measures shaft torque and RPM, calculates shaft power
• Dual-channel measuring system for rotating shafts
• 4 analogue outputs for torque, RPM and power
• RS-422 serial output for an external display
• Lens cleaning alarms
• No trimmers or jumpers; parameters stored in the module

About the Kongsberg 351792

The Kongsberg 351792 is the RTixe, the remote torque interface of Kongsberg's K-Chief 600 automation system. It measures torque and RPM on rotating shafts and calculates shaft power, using the shaft dimensions, maximum RPM and power and steel properties entered at commissioning. It gives torque, RPM and power on 4 analogue outputs, sends data over two CAN networks and can drive an external display over RS-422. Kongsberg's datasheet lists its class approvals as pending at the time of issue.

What is the 351792 used for?

The RTixe is part of a shaft power meter installation: it turns the measurement from the shaft into torque, RPM and power values for the automation system or an external display. It is mounted in a cabinet near the shaft line.

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the part number 351792 and the RTixe marking on the label. The RTi-2xeL (345304) is the version for hazardous (Ex) areas. Send a label photo, the revision and the vessel name or IMO number.