Kongsberg 345304 RTi-2xeL

Technical specifications

Manufacturer

Kongsberg

Manufacturer part no.

345304

Type

RTi-2xeL Remote Torque Interface

Application

K-Chief 600 alarm, monitoring and control

Used with

Kongsberg K-Chief 600

Module

RTi-2xeL Remote Torque Interface (distributed processing unit)

Measures

Shaft torque and RPM; calculates shaft power; dual-channel measuring for two shafts

Sensor link

Fibre-optic signal cables with laser transmitter; sensor signals immune to electrical noise

Analogue outputs

4 (torque, RPM, power, 1 spare); ±1/5/10 V (min. 5 kΩ) or ±5/10/20 mA (max. 550 Ω)

Accuracy

±0.5%

Serial output

RS-422 / RS-485

Power consumption

6 W, plus 300 mW per channel with current output

Communication

2 CAN ports, redundant CANopen field bus

Supply voltage

18 to 32 VDC

Operating temperature

-15 °C to +70 °C

Storage temperature

-25 °C to +70 °C

Max. relative humidity

96%, non-condensing

Protection

IP20

Environmental standards

IACS E10, IEC 60945

Vibration

4 g

Mounting

4 x M5 screws; directly on engines or compressors in a suitable cabinet

Weight

1.5 kg

Type approvals

Pending at datasheet issue: DNV, LRS, BV, GL, RINA, NK, ABS, KR, RMR, CCS

Technical documents (1)

• Kongsberg datasheet 350529 (RTi-2xeL)

Key features

• Measures shaft torque and RPM, calculates shaft power
• Listed by Kongsberg for use in Ex areas
• Fibre-optic sensor cables with laser transmitter
• Sensor signals immune to electrical noise
• 4 analogue outputs and RS-422 serial output
• No trimmers or jumpers; parameters stored in the module

About the Kongsberg 345304

The Kongsberg 345304 is the RTi-2xeL, the remote torque interface of Kongsberg's K-Chief 600 automation system that Kongsberg lists for use in Ex (hazardous) areas. Like the RTixe it measures shaft torque and RPM and calculates shaft power, but its sensor signals travel over fibre-optic cables from a laser transmitter, which makes them immune to electrical noise. Outputs are 4 analogue channels, two CAN networks and RS-422 for an external display. Kongsberg's datasheet lists its class approvals as pending at the time of issue.

What is the 345304 used for?

The RTi-2xeL is used for shaft power measurement where Kongsberg's Ex-area version is required. It feeds torque, RPM and power values to the automation system or an external display.

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the part number 345304 and the RTi-2xeL marking on the label. The RTixe (351792) is the standard version. Send a label photo, the revision, the hazardous-area zone and the vessel name or IMO number.