Kongsberg 333523 RDi-32xe

Technical specifications

Manufacturer

Kongsberg

Manufacturer part no.

333523

Type

RDi-32xe Remote Digital Input

Application

K-Chief 600 alarm, monitoring and control

Used with

Kongsberg K-Chief 600

Module

RDi-32xe Remote Digital Input (distributed processing unit)

Channels

32 digital inputs with LED status per channel

Signal types

On/off, normally open or normally closed dry contacts (switching level approx. 1.5 mA)

Sensor excitation

8 mA at 24 VDC nominal

Power consumption

16 W with all inputs active

Communication

2 CAN ports, redundant CANopen field bus

Isolation

Power floating from chassis; inputs supplied from the 24 VDC module supply; CAN ports individually isolated

Supply voltage

18 to 32 VDC

Operating temperature

-15 °C to +70 °C

Storage temperature

-25 °C to +70 °C

Max. relative humidity

96%, non-condensing

Protection

IP20

Environmental standards

IACS E10, IEC 60945

Vibration

4 g

Mounting

4 x M5 screws; directly on engines or compressors in a suitable cabinet

Weight

1.8 kg

Type approvals

DNV, LRS, BV, GL, RINA, NK, ABS, KR, RMR, CCS

Technical documents (1)

• Kongsberg datasheet 341335 (RDi-32xe)

Key features

• 32 digital input channels with LED indicators
• For dry (potential-free) contacts
• Alarm blocking, trend and time stamping in the module
• Sensor excitation with overload protection
• Self-checking with CAN status handling
• No trimmers or jumpers; parameters stored in the module

About the Kongsberg 333523

The Kongsberg 333523 is the RDi-32xe, the remote digital input module of Kongsberg's K-Chief 600 automation system for dry contacts. It reads 32 on/off signals from switches and contacts, normally open or normally closed, supplies the excitation current itself, and shows each channel's state on an LED. Alarms and events are time-stamped in the module and sent over a redundant CANopen field bus.

What is the 333523 used for?

The RDi-32xe collects switch and contact signals, such as level switches, pressure switches and equipment running or fault contacts, close to where they are wired, in an engine-room cabinet or on the main engine in a suitable enclosure. For active 24 VDC or AC signals Kongsberg uses the RDi-32Axe (333824) instead.

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the part number 333523 and the RDi-32xe marking on the label: the RDi-32Axe (333824) looks the same but takes active signals. Send a label photo, the revision and the vessel name or IMO number.