Kongsberg 333824 RDi-32Axe

Technical specifications

Manufacturer

Kongsberg

Manufacturer part no.

333824

Type

RDi-32Axe Remote Digital Input

Application

K-Chief 600 alarm, monitoring and control

Used with

Kongsberg K-Chief 600

Module

RDi-32Axe Remote Digital Input, active signals (distributed processing unit)

Channels

32 digital inputs with LED status per channel

Signal types

Active signal, 24 VDC or AC (50–70 Hz); on/off, normally open or normally closed

Power consumption

8 W with all inputs active

Communication

2 CAN ports, redundant CANopen field bus

Isolation

Power floating from chassis; each input individually isolated (opto-coupler); CAN ports individually isolated

Supply voltage

18 to 32 VDC

Operating temperature

-15 °C to +70 °C

Storage temperature

-25 °C to +70 °C

Max. relative humidity

96%, non-condensing

Protection

IP20

Environmental standards

IACS E10, IEC 60945

Vibration

4 g

Mounting

4 x M5 screws; directly on engines or compressors in a suitable cabinet

Weight

1.8 kg

Type approvals

DNV, LRS, BV, GL, RINA, NK, ABS, KR, RMR, CCS

Technical documents (1)

• Kongsberg datasheet 341335 (RDi-32Axe)

Key features

• 32 digital input channels with LED indicators
• For active 24 VDC or AC (50–70 Hz) signals
• Each input individually isolated by opto-coupler
• Alarm blocking, trend and time stamping in the module
• Self-checking with CAN status handling
• No trimmers or jumpers; parameters stored in the module

About the Kongsberg 333824

The Kongsberg 333824 is the RDi-32Axe, the version of Kongsberg's K-Chief 600 remote digital input module for active signals. Its 32 inputs take 24 VDC or AC (50–70 Hz) signals from powered equipment rather than dry contacts, and each input is individually isolated by an opto-coupler. States, alarms and events are time-stamped in the module and sent over a redundant CANopen field bus.

What is the 333824 used for?

The RDi-32Axe is used where the signals to be monitored are already powered, such as status outputs from other equipment, and isolation between channels matters. It is mounted close to the signal sources, in an engine-room cabinet or on the main engine in a suitable enclosure. For dry contacts Kongsberg uses the RDi-32xe (333523).

Lifecycle and successor

Active.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the part number 333824 and the RDi-32Axe marking on the label: the RDi-32xe (333523) looks the same but is for dry contacts. Send a label photo, the revision and the vessel name or IMO number.