Image is for illustrative purposes only. Please refer to product description.
- Manufacturer
- Siemens
- Manufacturer part number
- 6ES7155-6AU01-0CN0
- Product family
- SIMATIC ET 200SP Distributed I/O
- Category
- PLCs and I/O › Remote I/O heads and couplers
- Technical datasheet
- Data sheet
Specifications
| Attribute | Value |
|---|---|
| Type | Interface module |
| Manufacturer lifecycle | Active |
| Product type designation | IM 155-6 PN/2 HF |
| HW functional status | From FS02 |
| Firmware version | V4.2 |
| Firmware version / FW update possible | Yes |
| Product function / I&M data | Yes; I&M0 to I&M3 |
| Product function / Module swapping during operation (hot swapping) | Yes; Multi-hot swapping |
| Product function / Isochronous mode | Yes |
| Product function / Tool changer | Yes; Docking station and docking unit |
| Engineering with / STEP 7 TIA Portal configurable/integrated from version | V15.1 |
| Engineering with / STEP 7 configurable/integrated from version | use GSD file |
| Engineering with / PROFINET from GSD version/GSD revision | GSDML V2.43 |
| Configuration control / via dataset | Yes |
| Supply voltage / Rated value (DC) | 24 V |
Show all 99 specificationsShow fewer specifications
| Supply voltage / permissible range, lower limit (DC) | 19.2 V |
|---|---|
| Supply voltage / permissible range, upper limit (DC) | 28.8 V |
| Supply voltage / Reverse polarity protection | Yes |
| Supply voltage / Short-circuit protection | Yes |
| Mains buffering / Mains/voltage failure stored energy time | 10 ms |
| Input current / Current consumption, max. | 700 mA |
| Input current / Inrush current, max. | 4.5 A |
| Input current / I²t | 0.25 A²·s |
| Power loss, typ. | 2.4 W |
| Address space per module / Address space per module, max. | 288 byte; For input and output data respectively |
| Address space per station / Address space per station, max. | 1 440 byte |
| Rack / Quantity of operable ET 200SP modules, max. | 64 |
| Rack / Quantity of operable ET 200AL modules, max. | 16 |
| Submodules / Number of submodules per station, max. | 256 |
| Interfaces / Transmission procedure | 100BASE-TX |
| Number of PROFINET interfaces | 1; 2 ports (switch) |
| Interface types / RJ 45 (Ethernet) | Yes; with BusAdapter |
| Interface types / Number of ports | 2; with BusAdapter |
| Interface types / integrated switch | Yes |
| Interface types / BusAdapter (PROFINET) | Yes; BA 2x RJ45, BA 2x FC, BA 2x M12, BA 2x SCRJ, BA SCRJ/RJ45, BA SCRJ/FC, BA 2x LC, BA LC/RJ45, BA LC/FC |
| Protocols / PROFINET IO device | Yes |
| Protocols / Open IE communication | Yes |
| Protocols / Media redundancy | Yes; PROFINET MRP client |
| PROFINET IO Device / Services / IRT | Yes; 250 µs to 4 ms in 125 µs frame |
| PROFINET IO Device / Services / Dynamic Frame Packing (DFP) | No |
| PROFINET IO Device / Services / PROFIenergy | Yes |
| PROFINET IO Device / Services / Prioritized startup | Yes |
| PROFINET IO Device / Services / Shared device | Yes |
| PROFINET IO Device / Services / Number of IO Controllers with shared device, max. | 4 |
| RJ 45 (Ethernet) / Transmission procedure | PROFINET with 100 Mbit/s full duplex (100BASE-TX) |
| RJ 45 (Ethernet) / 100 Mbps | Yes |
| RJ 45 (Ethernet) / Autonegotiation | Yes |
| RJ 45 (Ethernet) / Autocrossing | Yes |
| Protocols / Supports protocol for PROFINET IO | Yes |
| Protocols / PROFIsafe | Yes |
| Protocols / PROFIBUS | No |
| Protocols / EtherNet/IP | No |
| Protocols / Modbus TCP | No |
| Number of connections / Number of MtM communication relationships/connections, max. | 16 |
| Redundancy mode / PROFINET system redundancy (S2) | Yes; NAP S2 |
| Redundancy mode / PROFINET system redundancy (R1) | No |
| Redundancy mode / H-Sync forwarding | Yes |
| Redundancy mode / Media redundancy / MRP | Yes |
| Redundancy mode / Media redundancy / MRPD | No |
| Open IE communication / TCP/IP | Yes |
| Open IE communication / SNMP | Yes |
| Open IE communication / LLDP | Yes |
| Isochronous mode / Equidistance | Yes |
| Isochronous mode / shortest clock pulse | 250 µs |
| Isochronous mode / max. cycle | 4 ms |
| Isochronous mode / Bus cycle time (TDP), min. | 250 µs |
| Isochronous mode / Jitter, max. | 1 µs |
| Interrupts/diagnostics/status information / Status indicator | Yes |
| Interrupts/diagnostics/status information / Alarms | Yes |
| Alarms / Diagnostics function | Yes |
| Alarms / Diagnostics indication LED / RUN LED | Yes; green LED |
| Alarms / Diagnostics indication LED / ERROR LED | Yes; red LED |
| Alarms / Diagnostics indication LED / MAINT LED | Yes; Yellow LED |
| Alarms / Diagnostics indication LED / Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| Alarms / Diagnostics indication LED / Connection display LINK TX/RX | Yes; 2x green link LEDs on BusAdapter |
| Potential separation / between backplane bus and electronics | No |
| Potential separation / between PROFINET and all other circuits | Yes; 1500 V AC (type test) |
| Potential separation / between supply and all other circuits | No |
| Permissible potential difference / between different circuits | Safety extra low voltage SELV |
| Isolation tested with | 707 V DC (type test) |
| Standards, approvals, certificates / Network loading class | 3 |
| Ecological footprint / environmental product declaration | Yes |
| Ecological footprint / Global warming potential / global warming potential, (total) [CO2 eq] | 105 kg |
| Ecological footprint / Global warming potential / global warming potential, (during production) [CO2 eq] | 13.7 kg |
| Ecological footprint / Global warming potential / global warming potential, (during operation) [CO2 eq] | 91.9 kg |
| Ecological footprint / Global warming potential / global warming potential, (after end of life cycle) [CO2 eq] | -0.617 kg |
| PROFINET Security Class | 1 |
| Ambient temperature during operation / horizontal installation, min. | -30 °C; No condensation |
| Ambient temperature during operation / horizontal installation, max. | 60 °C |
| Ambient temperature during operation / vertical installation, min. | -30 °C; No condensation |
| Ambient temperature during operation / vertical installation, max. | 50 °C |
| Altitude during operation relating to sea level / Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| Absolute humidity / dew point, min. | -60 °C; suitable for dry room applications |
| ET-Connection / via BU/BA Send | Yes; + 16 ET 200AL modules |
| Mechanics/material / Strain relief | Yes; Optional |
| Width | 50 mm |
| Height | 117 mm |
| Depth | 74 mm |
| Weight, approx. | 120 g; without BusAdapter |
Description
The Siemens 6ES7155-6AU01-0CN0 is the IM 155-6 PN/2 High Feature, the head module of an ET 200SP station on PROFINET. Siemens describes it with one slot for a BusAdapter, up to 64 I/O modules and 16 ET 200AL modules, S2 redundancy, multi-hotswap and isochronous mode; its data sheet gives two ports through the BusAdapter and up to 256 submodules per station. It includes the server module. SiePortal lists it as an active product.
Application: PROFINET head of an ET 200SP station
Used with: ET 200SP stations on PROFINET
What is the 6ES7155-6AU01-0CN0 used for?
It connects an ET 200SP station's I/O modules to the PROFINET controller. If it fails, the whole station drops off the network.
Key features
- PROFINET interface with 2 ports via BusAdapter (100BASE-TX)
- Up to 64 ET 200SP and 16 ET 200AL modules
- Up to 256 submodules per station
- S2 system redundancy, multi-hotswap, isochronous mode
Documents and Resources
Associated Products
| Image | Product | Description | Stock | View | Add to RFQ |
|---|---|---|---|---|---|
 | 6ES7193-6AR00-0AA0Siemens | BusAdapter BA 2xRJ45 | In stock | View | |
 | 6ES7193-6BP00-0DA0Siemens | BaseUnit BU15-P16+A0+2D, new load group | In stock | View | |
 | 6ES7193-6BP00-0BA0Siemens | BaseUnit BU15-P16+A0+2B, bridged to the left | In stock | View | |
 | 6ES7131-6BH01-0BA0Siemens | DI 16x24VDC ST digital input module | In stock | View | |
 | 6ES7132-6BH01-0BA0Siemens | DQ 16x24VDC/0.5A ST digital output module | In stock | View |
Product Questions
Is the 6ES7155-6AU01-0CN0 discontinued?
No. Its manufacturer lifecycle status is Active.
Can another Siemens SIMATIC ET 200SP part replace it?
Potential replacements must be checked against the required ratings, dimensions and connections. Sharing a family name does not establish interchangeability.
Do you ship worldwide?
Yes. TimControls ships worldwide. Parts usually ship within 3 to 7 working days of order confirmation, and the exact lead time and shipping options are stated on your quote. Include your delivery country and postal code when you ask for a quote.
Latest news
TimControls is an independent distributor. Manufacturer names and logos are the property of their respective owners and identify products we source; they do not imply manufacturer authorization or affiliation.