6ES7193-6BP00-0BA0

Technical specifications

Manufacturer

Siemens

Manufacturer part no.

6ES7193-6BP00-0BA0

Type

BaseUnit

Application

Carrier and terminals for an ET 200SP I/O module

Used with

ET 200SP I/O modules of BU type A0

Product type designation

BU type A0

HW functional status

From FS06

Supply voltage / Rated value (DC)

24 V

external protection for power supply lines

Yes; 24 V DC/10 A miniature circuit breaker with type B or C tripping characteristic

Mains filter / Integrated

No

Current carrying capacity / For P1 and P2 bus, max.

10 A

Current carrying capacity / For process terminals, max.

2 A

Hardware configuration / Automatic encoding

Yes

Formation of potential groups / New potential group

No

Formation of potential groups / Potential group continued from the left

Yes

Slots / Number of slots

1; Type A0

Isolation tested with

707 V DC (type test)

Ecological footprint / environmental product declaration

Yes

Ecological footprint / Global warming potential / global warming potential, (total) [CO2 eq]

0.873 kg

Ecological footprint / Global warming potential / global warming potential, (during production) [CO2 eq]

0.866 kg

Ecological footprint / Global warming potential / global warming potential, (during operation) [CO2 eq]

0 kg

Ecological footprint / Global warming potential / global warming potential, (after end of life cycle) [CO2 eq]

-0.0011 kg

Ambient temperature during operation / horizontal installation, min.

-30 °C

Ambient temperature during operation / horizontal installation, max.

60 °C

Ambient temperature during operation / vertical installation, min.

-30 °C

Ambient temperature during operation / vertical installation, max.

50 °C

Altitude during operation relating to sea level / Installation altitude above sea level, max.

5 000 m; Restrictions for installation altitudes > 2 000 m, see manual

Absolute humidity / dew point, min.

-60 °C; suitable for dry room applications

Terminals / Terminal type

Push-in terminal

Terminals / system-integrated shield connection

Yes; Optional

Technical documents (1)

• Siemens data sheet 6ES7193-6BP00-0BA0

Key features

• BU type A0, 15 mm wide
• 16 push-in process terminals, 2 A each
• Continues the potential (load) group from the left
• No AUX terminals

About the Siemens 6ES7193-6BP00-0BA0

The Siemens 6ES7193-6BP00-0BA0 is the ET 200SP BaseUnit BU15-P16+A0+2B. Siemens's data sheet gives BU type A0, 16 push-in terminals rated 2 A, no AUX terminals, and a potential group continued from the left: this BaseUnit takes its supply from the one before it. SiePortal lists it as an active product.

What is the 6ES7193-6BP00-0BA0 used for?

It is the base an ET 200SP I/O module plugs into, carrying the field wiring and the backplane. This type follows the BaseUnit that starts the load group.

Lifecycle and successor

Active product (Siemens SiePortal).

Before you order

What to photograph or confirm so the right unit is quoted.

Check the order number: this one (…-0BA0) continues the load group; …-0DA0 starts a new one.