Siemens 6ES7195-7HD10-0XA0

Technical specifications

Manufacturer

Siemens

Manufacturer part no.

6ES7195-7HD10-0XA0

Type

Bus module

Application

Active backplane bus for ET 200M

Used with

ET 200M station

Width

97 mm

Height

92 mm

Depth

30 mm

Weight, approx.

133 g

Hardware configuration / Modules per bus module

Two IM 153-2 interface modules, for redundancy

Compatible interface modules

IM 153-2Bx00 and IM 153-2Bxx1 only (e.g. IM 153-2BA00, -2BAx1, -2BB00)

Not compatible

IM 153-2AA02 and -2AB01: on this bus module they cannot reach the I/O modules

Identification

Two yellow markings

Scope of delivery

Bus module cover included

I&M data slots

245 (left interface module), 246 (right)

Backplane bus

Active: with a module missing, the other modules can still be reached

Mounting rail

Rail for module change during operation (6ES7195-1Gxx0-0XA0) only

Hardware configuration / Active bus modules per rail, max.

9, depending on rail length

Installation and removal

De-energized only; bus modules cannot be added or removed during operation

Ambient temperature during operation / horizontal installation

0 °C to 60 °C

Ambient temperature during operation / vertical installation

0 °C to 40 °C

Technical documents (2)

• Siemens data sheet 6ES7195-7HD10-0XA0
• Siemens ET 200M operating instructions EWA-4NEB7806006-09 (04/2022), BM IM/IM bus module for redundancy

Key features

• Holds two IM 153-2 interface modules for a redundant ET 200M station
• Takes the IM 153-2Bx00 and IM 153-2Bxx1 only; marked with two yellow markings
• For removal and insertion during RUN
• Bus module cover included
• 97 mm wide, 92 mm high, 30 mm deep
• Weight approx. 133 g
• Discontinued by Siemens on 1 October 2025; spare part only

About the Siemens 6ES7195-7HD10-0XA0

The Siemens 6ES7195-7HD10-0XA0 is the ET 200M active bus module (BM IM/IM) for two redundant IM 153-2 interface modules. It takes only the IM 153-2Bx00 and IM 153-2Bxx1, and carries two yellow markings to show it: Siemens's ET 200M manual pairs the earlier IM 153-2AA02 and -2AB01 with the 6ES7195-7HD00-0XA0 and warns that on this module they cannot reach the I/O modules. Its siblings hold I/O modules instead: one or two 40 mm modules (6ES7195-7HB00-0XA0) or one 80 mm module (6ES7195-7HC00-0XA0). Siemens's data sheet marks it as a spare part.

What is the 6ES7195-7HD10-0XA0 used for?

It carries the pair of IM 153-2 interface modules at the head of a redundant ET 200M station, and lets either be changed while the station runs.

Lifecycle and successor

Discontinued.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the label and the two yellow markings: 7HD10 for two IM 153-2Bx00 or -2Bxx1, 7HB00 for one or two 40 mm modules, 7HC00 for one 80 mm module. Note the IM 153-2 order numbers too.