Image is for illustrative purposes only. Please refer to product description.
- Manufacturer
- Siemens
- Manufacturer part number
- 6ES7322-1FH00-0AA0
- Product family
- SIMATIC S7-300 PLC Modules
- Category
- PLCs and I/O › Digital I/O modules
- Technical datasheet
- Data sheet
Specifications
| Attribute | Value |
|---|---|
| Type | Digital output module |
| Manufacturer lifecycle | Discontinued |
| Load voltage L1 / Rated value (AC) | 230 V; 120/230 V AC |
| Load voltage L1 / permissible range, lower limit (AC) | 79 V |
| Load voltage L1 / permissible range, upper limit (AC) | 264 V |
| Input current / from load voltage L1 (without load), max. | 2 mA |
| Input current / from backplane bus 5 V DC, max. | 200 mA |
| Power loss, typ. | 8.6 W |
| Number of digital outputs | 16 |
| Digital outputs / Short-circuit protection | Yes; Fuse 8 A, 250 V; per group |
| Short-circuit protection / required current for fuse shutdown, min. | 40 A |
| Short-circuit protection / Response time, max. | 300 ms |
| Controlling a digital input | Yes |
| Digital outputs / Size of motor starters according to NEMA, max. | 4 NEMA compliant |
| Digital outputs / Spare fuses | 8 A / quick response |
Show all 58 specificationsShow fewer specifications
| Switching capacity of the outputs / on lamp load, max. | 50 W |
|---|---|
| Output voltage / for signal "1" (at max. current), min. | L1 (-1.5 V) |
| Output voltage / for signal "1" (at min. current), min. | L1 (-8.5 V) |
| Output current / for signal "1" rated value | 1 A |
| Output current / for signal "1" permissible range for 0 to 40 °C, min. | 10 mA |
| Output current / for signal "1" permissible range for 0 to 40 °C, max. | 1 A |
| Output current / for signal "1" permissible range for 40 to 60 °C, min. | 10 mA |
| Output current / for signal "1" permissible range for 40 to 60 °C, max. | 0.5 A |
| Output current / for signal "1" minimum load current | 10 mA |
| Output current / for signal "1" permissible surge current, max. | 20 A; with 2 half waves |
| Output current / for signal "0" residual current, max. | 2 mA |
| Parallel switching of two outputs / for uprating | No |
| Parallel switching of two outputs / for redundant control of a load | Yes; only outputs of the same group |
| Switching frequency / with resistive load, max. | 10 Hz |
| Switching frequency / with inductive load, max. | 0.5 Hz |
| Switching frequency / with inductive load (acc. to IEC 60947-5-1, AC15), max. | 0.5 Hz |
| Switching frequency / on lamp load, max. | 1 Hz |
| Total current of the outputs (per group) / horizontal installation / up to 40 °C, max. | 4 A |
| Total current of the outputs (per group) / horizontal installation / up to 60 °C, max. | 2 A |
| Total current of the outputs (per group) / vertical installation / up to 40 °C, max. | 2 A |
| Cable length / shielded, max. | 1 000 m |
| Cable length / unshielded, max. | 600 m |
| Interrupts/diagnostics/status information / Diagnostics function | Yes; Fuse blown or load voltage missing |
| Alarms / Diagnostic alarm | No |
| Diagnoses / Wire break | No |
| Diagnoses / short-circuit | No |
| Diagnoses / Fuse blown | Yes |
| Diagnoses / Missing load voltage | No |
| Diagnostics indication LED / Rated load voltage PWR (green) | No |
| Diagnostics indication LED / Fuse OK FSG (green) | Yes; Red LED for fuse |
| Diagnostics indication LED / Group error SF (red) | Yes |
| Diagnostics indication LED / Status indicator digital output (green) | Yes |
| Potential separation digital outputs / between the channels, in groups of | 8 |
| Potential separation digital outputs / between the channels and backplane bus | Yes; Optocoupler |
| Isolation tested with | 4 000 V DC |
| required front connector | 20-pin |
| Width | 40 mm |
| Height | 125 mm |
| Depth | 120 mm |
| Weight, approx. | 275 g |
| Phase-out announced (PM400) | 1 October 2023 |
| Product cancellation (PM410) | 1 October 2025 |
| Spare part | Yes, supplied by Siemens as a spare part only |
Description
The Siemens 6ES7322-1FH00-0AA0 is the SM 322 digital output module for 120/230 V AC loads, 16 isolated outputs at 1 A each. Siemens's data sheet derates the output current to 0.5 A between 40 and 60 °C and gives a 20-pin front connector. Siemens's data sheet marks it as a spare part. Siemens names no direct successor for the order number; its route forward is migration to the S7-1500 with ET 200MP.
Application: Digital I/O module
Used with: SIMATIC S7-300 rack (S7-300 backplane bus)
What is the 6ES7322-1FH00-0AA0 used for?
It switches mains-voltage loads, such as 230 V AC contactor coils, solenoids and lamps, directly from an S7-300.
Key features
- 16 digital outputs, 120/230 V AC
- 1 A per output (0.5 A at 40-60 °C)
- Isolated
- 20-pin front connector
- Discontinued by Siemens on 1 October 2025; spare part only
Documents and Resources
Associated Products
| Image | Product | Description | Stock | View | Add to RFQ |
|---|---|---|---|---|---|
 | 6ES7322-1BL00-0AA0Siemens | SM 322 digital output, 32 DO, 24 V DC, 0.5 A | In stock | View | |
 | 6ES7321-1BH02-0AA0Siemens | SM 321 digital input, 16 DI, 24 V DC | In stock | View | |
 | 6ES7322-1BH01-0AA0Siemens | SM 322 digital output, 16 DO, 24 V DC, 0.5 A | In stock | View | |
 | 6ES7322-1HH01-0AA0Siemens | SM 322 relay output, 16 DO, relay contacts | In stock | View | |
 | 6ES7323-1BL00-0AA0Siemens | SM 323 digital I/O, 16 DI and 16 DO, 24 V DC | In stock | View | |
 | 6ES7321-1FH00-0AA0Siemens | SM 321 digital input, 16 DI, 120/230 V AC | In stock | View | |
 | 6ES7322-1HF01-0AA0Siemens | SM 322 relay output, 8 DO, relay contacts | In stock | View | |
 | 6ES7321-7BH01-0AB0Siemens | SM 321 digital input, 16 DI, 24 V DC, diagnostics and hardware interrupt | In stock | View | |
 | 6ES7321-1BH50-0AA0Siemens | SM 321 digital input, 16 DI, 24 V DC, sourcing input | In stock | View | |
 | 6ES7322-1BF01-0AA0Siemens | SM 322 digital output, 8 DO, 24 V DC, 2 A | In stock | View | |
 | 6ES7322-8BF00-0AB0Siemens | SM 322 digital output, 8 DO, 24 V DC, 0.5 A, diagnostics | In stock | View | |
 | 6ES7322-1HF10-0AA0Siemens | SM 322 relay output, 8 DO, 5 A, isolated per channel | In stock | View |
Product Questions
Is the 6ES7322-1FH00-0AA0 discontinued?
Yes. Its manufacturer lifecycle status is Discontinued.
Can another Siemens SIMATIC S7-300 part replace it?
Potential replacements must be checked against the required ratings, dimensions and connections. Sharing a family name does not establish interchangeability.
Do you ship worldwide?
Yes. TimControls ships worldwide. Parts usually ship within 3 to 7 working days of order confirmation, and the exact lead time and shipping options are stated on your quote. Include your delivery country and postal code when you ask for a quote.
Related Products and Accessories
Siemens
6ES7392-1BM01-0AA0Front connector, 40-pole, spring-loaded terminals
Same SIMATIC S7-300 system
In stock
Siemens
6ES7341-1CH02-0AE0CP 341 communications processor, RS 422/485
Same SIMATIC S7-300 system
In stock
Siemens
6ES7307-1KA02-0AA0PS307 power supply, 120/230 V AC in, 24 V DC 10 A out
Same SIMATIC S7-300 system
In stock
Siemens
6ES7307-1EA01-0AA0PS307 power supply, 120/230 V AC in, 24 V DC 5 A out
Same SIMATIC S7-300 system
In stock
Latest news
TimControls is an independent distributor. Manufacturer names and logos are the property of their respective owners and identify products we source; they do not imply manufacturer authorization or affiliation.