6ES7412-2EK06-0AB0

Siemens CPU 412-2 PN, 1 MB, MPI/DP and PROFINET

Siemens 6ES7412-2EK06-0AB0 CPU 412-2 PN, photo from Siemens data sheet 6ES7412-2EK06-0AB0

Image is for illustrative purposes only. Please refer to product description.

Delivery options

Siemens SIMATIC S7-400 CPU 412-2 PN: central processing unit with 1 MB work memory (0.5 MB code, 0.5 MB data), an MPI/DP interface at 12 Mbit/s and an Ethernet/PROFINET interface.

Manufacturer: Siemens
Manufacturer part no.: 6ES7412-2EK06-0AB0
Product family: SIMATIC S7-400 PLC CPUs
Type: PLC CPU
Lifecycle: Discontinued
OEM successor: Not stated
Technical datasheet: Data sheet

Technical specifications

Manufacturer: Siemens
Manufacturer part no.: 6ES7412-2EK06-0AB0
Type: PLC CPU
Application: PLC controller
Used with: SIMATIC S7-400 rack (system power supply)
Product type designation: CPU 412-2 PN
HW functional status: 01
Firmware version: V6.0
Product function / Isochronous mode: Yes; Via PROFIBUS DP or PROFINET interface
Engineering with / Programming package: STEP 7 V5.5 or higher/iMap V3.0 + iMap STEP 7 Add-on V3.0 SP5 or higher
CiR synchronization time, basic load: 100 ms
CiR synchronization time, time per I/O byte: 30 µs; Time per I/O byte
Supply voltage / Rated value (DC): Power supply via system power supply
Input current / from backplane bus 5 V DC, typ.: 1.1 A
Input current / from backplane bus 5 V DC, max.: 1.3 A
Input current / from backplane bus 24 V DC, max.: 150 mA; 150 mA per DP interface
Input current / from interface 5 V DC, max.: 90 mA; At the DP interface
Power loss, typ.: 5.5 W
Storage / Type of memory: RAM
Work memory / Integrated: 1 Mbyte
Work memory / integrated (for program): 0.5 Mbyte
Work memory / integrated (for data): 0.5 Mbyte
Work memory / expandable: No
Load memory / expandable FEPROM: Yes; with Memory Card (FLASH)
Load memory / expandable FEPROM, max.: 64 Mbyte
Load memory / integrated RAM, max.: 512 kbyte
Load memory / expandable RAM: Yes; with Memory Card (RAM)
Load memory / expandable RAM, max.: 64 Mbyte
Backup / present: Yes
Backup / with battery: Yes; all data

Show all 398 specifications

Backup / Without battery: No
Backup battery / Backup current, typ.: 125 µA; up to 40 °C
Backup battery / Backup current, max.: 450 µA
Backup battery / Backup time, max.: Dealt with in the module data manual with the secondary conditions and the factors of influence
Backup battery / Feeding of external backup voltage to CPU: 5 V DC to 15 V DC
CPU processing times / for bit operations, typ.: 75 ns
CPU processing times / for word operations, typ.: 75 ns
CPU processing times / for fixed point arithmetic, typ.: 75 ns
CPU processing times / for floating point arithmetic, typ.: 225 ns
DB / Number, max.: 3 000; Number range: 1 to 16000
DB / Size, max.: 64 kbyte
FB / Number, max.: 1 500; Number range: 0 to 7999
FB / Size, max.: 64 kbyte
FC / Number, max.: 1 500; Number range: 0 to 7999
FC / Size, max.: 64 kbyte
OB / Number, max.: see instruction list
OB / Size, max.: 64 kbyte
OB / Number of free cycle OBs: 1; OB 1
OB / Number of time alarm OBs: 2; OB 10, 11
OB / Number of delay alarm OBs: 2; OB 20, 21
OB / Number of cyclic interrupt OBs: 2; OB 32, 35 (shortest cycle that can be set = 500 µs)
OB / Number of process alarm OBs: 2; OB 40, 41
OB / Number of DPV1 alarm OBs: 3; OB 55-57
OB / Number of isochronous mode OBs: 2; OB 61-62
OB / Number of multicomputing OBs: 1; OB 60
OB / Number of background OBs: 1; OB 90
OB / Number of startup OBs: 3; OB 100-102
OB / Number of asynchronous error OBs: 9; OB 80-88
OB / Number of synchronous error OBs: 2; OB 121, 122
Nesting depth / per priority class: 24
Nesting depth / additional within an error OB: 1
S7 counter / Number: 2 048
S7 counter / Retentivity / can be set: Yes
S7 counter / Retentivity / preset: Z 0 to Z 7
S7 counter / Counting range / lower limit: 0
S7 counter / Counting range / upper limit: 999
IEC counter / present: Yes
IEC counter / Type: SFB
IEC counter / Number: Unlimited (limited only by RAM capacity)
S7 timer / Number: 2 048
S7 timer / Retentivity / can be set: Yes
S7 timer / Retentivity / preset: No times retentive
S7 timer / Time range / lower limit: 10 ms
S7 timer / Time range / upper limit: 9 990 s
IEC timer / present: Yes
IEC timer / Type: SFB
IEC timer / Number: Unlimited (limited only by RAM capacity)
Retentive data area (incl. timers, counters, flags), max.: Total working and load memory (with backup battery)
Flag / Size, max.: 4 kbyte; Size of bit memory address area
Flag / Retentivity available: Yes
Flag / Retentivity preset: MB 0 to MB 15
Flag / Number of clock memories: 8; in 1 memory byte
Local data / adjustable, max.: 8 kbyte
Local data / preset: 4 kbyte
I/O address area / Inputs: 4 kbyte
I/O address area / Outputs: 4 kbyte
Process image / Inputs, adjustable: 4 kbyte
Process image / Outputs, adjustable: 4 kbyte
Process image / Inputs, default: 128 kbyte
Process image / Outputs, default: 128 kbyte
Process image / consistent data, max.: 244 byte
Process image / Access to consistent data in process image: Yes
Subprocess images / Number of subprocess images, max.: 15
Digital channels / Inputs: 32 768
Digital channels / Inputs / of which central: 32 768
Digital channels / Outputs: 32 768
Digital channels / Outputs / of which central: 32 768
Analog channels / Inputs: 2 048
Analog channels / Inputs / of which central: 2 048
Analog channels / Outputs: 2 048
Analog channels / Outputs / of which central: 2 048
Hardware configuration / Integrated power supply: No
Hardware configuration / Number of expansion units, max.: 21
Hardware configuration / connectable OPs: 47
Hardware configuration / Multicomputing: Yes; 4 CPUs max. (with UR1 or UR2)
Interface modules / Number of connectable IMs (total), max.: 6
Interface modules / Number of connectable IM 460s, max.: 6
Interface modules / Number of connectable IM 463s, max.: 4; IM 463-2
Number of DP masters / integrated: 1
Number of DP masters / via CP: 10; CP 443-5 Extended
Number of DP masters / via IM 467: 4
Number of DP masters / Mixed mode IM + CP permitted: No; IM 467 not suitable for use with CP 443-5 Ext. and CP 443-1 EX4x, EX20, GX20 (in PROFINET IO mode)
Number of DP masters / via interface module: 0
Number of DP masters / Number of pluggable S5 modules (via adapter capsule in central device), max.: 6
Number of IO Controllers / Integrated: 1
Number of IO Controllers / Via CP: 4; No mixed operation of CP443-1 EX40 and CP443-1 EX 41/EX20/GX20, max. 4 in central controller
Number of operable FMs and CPs (recommended) / FM: Limited by number of slots and number of connections
Number of operable FMs and CPs (recommended) / CP, PtP: CP 440: Limited by number of slots; CP 441: Limited by number of slots and number of connections
Number of operable FMs and CPs (recommended) / PROFIBUS and Ethernet CPs: 14; In total max. 10 CPs as DP master and PROFINET controller, of which up to 10 IMs or CPs as DP master and up to 4 CPs as PROFINET controller
Slots / required slots: 1
Clock / Hardware clock (real-time): Yes
Clock / retentive and synchronizable: Yes
Clock / Resolution: 1 ms
Clock / Deviation per day (buffered), max.: 1.7 s; Power off
Clock / Deviation per day (unbuffered), max.: 8.6 s; For power On
Operating hours counter / Number: 16
Operating hours counter / Number/Number range: 0 to 15
Operating hours counter / Range of values: SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 - 1 hours
Operating hours counter / Granularity: 1 h
Operating hours counter / retentive: Yes
Clock synchronization / supported: Yes
Clock synchronization / to MPI, master: Yes
Clock synchronization / on MPI, device: Yes
Clock synchronization / to DP, master: Yes
Clock synchronization / on DP, device: Yes
Clock synchronization / in AS, master: Yes
Clock synchronization / in AS, device: Yes
Clock synchronization / on Ethernet via NTP: Yes; As client
Time difference in system when synchronizing via / Ethernet, max.: 10 ms
Time difference in system when synchronizing via / MPI, max.: 200 ms
Interfaces/bus type: 1 x MPI/PROFIBUS DP, 1 x PROFINET (2 ports)
Number of RS 485 interfaces: 1
Number of other interfaces: 0
Interfaces / Optical interface: No
1. Interface / Interface type: MPI/PROFIBUS DP
1. Interface / Isolated: Yes
Interface types / RS 485: Yes
Interface types / Output current of the interface, max.: 150 mA
Protocols / MPI: Yes
1. Interface / Protocols / PROFIBUS DP master: Yes
1. Interface / Protocols / PROFIBUS DP device: Yes
MPI / Number of connections: 32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
MPI / Transmission rate, max.: 12 Mbit/s
MPI / Services / PG/OP communication: Yes
MPI / Services / Routing: Yes
MPI / Services / Global data communication: Yes
MPI / Services / S7 basic communication: Yes
MPI / Services / S7 communication: Yes
MPI / Services / S7 communication, as client: Yes
MPI / Services / S7 communication, as server: Yes
PROFIBUS DP master / Number of connections, max.: 16; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1
PROFIBUS DP master / Transmission rate, max.: 12 Mbit/s
PROFIBUS DP master / max. number of DP devices: 32
PROFIBUS DP master / Services / PG/OP communication: Yes
PROFIBUS DP master / Services / Routing: Yes
PROFIBUS DP master / Services / Global data communication: No
PROFIBUS DP master / Services / S7 basic communication: Yes
PROFIBUS DP master / Services / S7 communication: Yes
PROFIBUS DP master / Services / S7 communication, as client: Yes
PROFIBUS DP master / Services / S7 communication, as server: Yes
PROFIBUS DP master / Services / Equidistance: Yes
PROFIBUS DP master / Services / Isochronous mode: Yes
PROFIBUS DP master / Services / SYNC/FREEZE: Yes
PROFIBUS DP master / Services / activation/deactivation of DP devices: Yes
PROFIBUS DP master / Services / Direct data exchange (slave-to-slave communication): Yes
PROFIBUS DP master / Services / DPV1: Yes
PROFIBUS DP master / Address area / Inputs, max.: 2 kbyte
PROFIBUS DP master / Address area / Outputs, max.: 2 kbyte
PROFIBUS DP master / User data per DP device / user data per DP device, max.: 244 byte
PROFIBUS DP master / User data per DP device / Inputs, max.: 244 byte
PROFIBUS DP master / User data per DP device / Outputs, max.: 244 byte
PROFIBUS DP master / User data per DP device / Slots, max.: 244
PROFIBUS DP master / User data per DP device / per slot, max.: 128 byte
PROFIBUS DP device / Number of connections: 16
PROFIBUS DP device / Transmission rate, max.: 12 Mbit/s
PROFIBUS DP device / automatic baud rate search: No
PROFIBUS DP device / Address area, max.: 32; Virtual slots
PROFIBUS DP device / User data per address area, max.: 32 byte
PROFIBUS DP device / User data per address area, max. / of which consistent, max.: 32 byte
PROFIBUS DP device / Services / PG/OP communication: Yes; with interface active
PROFIBUS DP device / Services / Routing: Yes; with interface active
PROFIBUS DP device / Services / Global data communication: No
PROFIBUS DP device / Services / S7 basic communication: No
PROFIBUS DP device / Services / S7 communication: Yes
PROFIBUS DP device / Services / S7 communication, as client: Yes
PROFIBUS DP device / Services / S7 communication, as server: Yes
PROFIBUS DP device / Services / Direct data exchange (slave-to-slave communication): No
PROFIBUS DP device / Services / DPV1: No
PROFIBUS DP device / Transfer memory / Inputs: 244 byte
PROFIBUS DP device / Transfer memory / Outputs: 244 byte
2. Interface / Interface type: PROFINET
2. Interface / Isolated: Yes
2. Interface / automatic detection of transmission rate: Yes; Autosensing
2. Interface / Autonegotiation: Yes
2. Interface / Autocrossing: Yes
2. Interface / Change of IP address at runtime, supported: Yes; Assignment by higher-level IO-Controller or by the user program with SFB104 "IP_CONF"
Interface types / RJ 45 (Ethernet): Yes
Interface types / Number of ports: 2
Interface types / integrated switch: Yes
Protocols / PROFINET IO Controller: Yes
Protocols / PROFINET IO device: Yes
Protocols / PROFINET CBA: Yes
2. Interface / Protocols / PROFIBUS DP master: No
2. Interface / Protocols / PROFIBUS DP device: No
Protocols / Open IE communication: Yes
Protocols / Web server: Yes
Protocols / Point-to-point connection: No
Protocols / Media redundancy: Yes
PROFINET IO Controller / Transmission rate, max.: 100 Mbit/s
PROFINET IO Controller / Services / PG/OP communication: Yes
PROFINET IO Controller / Services / S7 communication: Yes
PROFINET IO Controller / Services / Isochronous mode: Yes; Only with IRT and the High Performance option
PROFINET IO Controller / Services / Shared device: Yes
PROFINET IO Controller / Services / Prioritized startup: Yes
PROFINET IO Controller / Services / Number of IO devices with prioritized startup, max.: 32
PROFINET IO Controller / Services / Number of connectable IO Devices, max.: 256
PROFINET IO Controller / Services / Of which IO devices with IRT, max.: 64
2. Interface / PROFINET IO Controller / Services / Number of connectable IO Devices, max. / Of which IO devices with IRT, max. / of which in line, max.: 64
PROFINET IO Controller / Services / Number of IO Devices with IRT and the option "high flexibility": 256
2. Interface / PROFINET IO Controller / Services / Number of IO Devices with IRT and the option "high flexibility" / of which in line, max.: 61
PROFINET IO Controller / Services / Number of connectable IO Devices for RT, max.: 256
2. Interface / PROFINET IO Controller / Services / Number of connectable IO Devices for RT, max. / of which in line, max.: 256
PROFINET IO Controller / Services / Activation/deactivation of IO Devices: Yes
PROFINET IO Controller / Services / Number of IO Devices that can be simultaneously activated/deactivated, max.: 8
PROFINET IO Controller / Services / IO Devices changing during operation (partner ports), supported: Yes
PROFINET IO Controller / Services / Number of IO Devices per tool, max.: 8; 8 parallel calls of the SFC 12 "D_ACT_DP" possible per line. Max. 32 IO Devices changing during operation (partner ports) are supported
PROFINET IO Controller / Services / Device replacement without swap medium: Yes
PROFINET IO Controller / Services / Send cycles: 250 μs, 500 μs, 1 ms, 2 ms, 4 ms additionally with IRT with high performance: 250 µs to 4 ms in 125 µs frame
PROFINET IO Controller / Services / Updating time: 250 µs to 512 ms; minimum value depends on preset communication share for PROFINET IO, on the number of IO Devices and on the amount of configured user data, see PROFINET system description
PROFINET IO Controller / Address area / Inputs, max.: 4 kbyte
PROFINET IO Controller / Address area / Outputs, max.: 4 kbyte
PROFINET IO Controller / Address area / User data consistency, max.: 1 024 byte
PROFINET IO Device / Services / PG/OP communication: Yes
PROFINET IO Device / Services / S7 communication: Yes
PROFINET IO Device / Services / Isochronous mode: No
PROFINET IO Device / Services / IRT: Yes
PROFINET IO Device / Services / Prioritized startup: Yes
PROFINET IO Device / Services / Shared device: Yes
PROFINET IO Device / Services / Number of IO Controllers with shared device, max.: 2
PROFINET IO Device / Transfer memory / Inputs, max.: 1 440 byte; Per IO Controller with shared device
PROFINET IO Device / Transfer memory / Outputs, max.: 1 440 byte; Per IO Controller with shared device
PROFINET IO Device / Submodules / Number, max.: 64
PROFINET IO Device / Submodules / User data per submodule, max.: 1 024 byte
PROFINET IO Device / PROFINET CBA / acyclic transmission: Yes
PROFINET IO Device / PROFINET CBA / cyclic transmission: Yes
PROFINET IO Device / Open IE communication / Number of connections, max.: 46
PROFINET IO Device / Open IE communication / Local port numbers used at the system end: 0, 20, 21, 25, 80, 102, 135, 161, 34962, 34963, 34964, 65532, 65533, 65534, 65535
PROFINET IO Device / Open IE communication / Keep-alive function, supported: Yes
Redundancy mode / Media redundancy / Switchover time on line break, typ.: 200 ms
Redundancy mode / Media redundancy / Number of stations in the ring, max.: 50
SIMATIC communication / S7 routing: Yes
Open IE communication / TCP/IP: Yes; via integrated PROFINET interface and loadable FBs
Open IE communication / TCP/IP / Number of connections, max.: 46
Open IE communication / TCP/IP / Data length, max.: 32 kbyte
Open IE communication / TCP/IP / several passive connections per port, supported: Yes
Open IE communication / ISO-on-TCP (RFC1006): Yes; Via integrated PROFINET interface or CP 443-1 Adv. and loadable FBs
Open IE communication / ISO-on-TCP (RFC1006) / Number of connections, max.: 46
Open IE communication / ISO-on-TCP (RFC1006) / Data length, max.: 32 kbyte; 1 452 bytes via CP 443-1 Adv.
Open IE communication / UDP: Yes; via integrated PROFINET interface and loadable FBs
Open IE communication / UDP / Number of connections, max.: 46
Open IE communication / UDP / Data length, max.: 1 472 byte
Web server / supported: Yes
Web server / User-defined websites: Yes
Web server / Number of HTTP clients: 5
Isochronous mode / Equidistance: Yes
Number of DP masters with isochronous mode: 1
payload per isochronous device, max.: 244 byte
Isochronous mode / shortest clock pulse: 1.5 ms; 0.5 ms without use of SFC 126, 127
Isochronous mode / max. cycle: 32 ms
PG/OP communication: Yes
PG/OP communication / Number of connectable OPs with message processing: 47; When using Alarm_S/SQ and Alarm_D/DQ
PG/OP communication / Number of connectable OPs without message processing: 47
Communication functions / Data record routing: Yes
Global data communication / supported: Yes
Global data communication / Number of GD loops, max.: 8
Global data communication / Number of GD packets, transmitter, max.: 8
Global data communication / Number of GD packets, receiver, max.: 16
Global data communication / Size of GD packets, max.: 54 byte
Global data communication / Size of GD packet (of which consistent), max.: 1 variable
S7 basic communication / supported: Yes
S7 basic communication / User data per job, max.: 76 byte
S7 basic communication / User data per job (of which consistent), max.: 1 variable
S7 communication / supported: Yes
S7 communication / as server: Yes
S7 communication / As client: Yes
S7 communication / User data per job, max.: 64 kbyte
S7 communication / User data per job (of which consistent), max.: 462 byte; 1 variable
S5 compatible communication / supported: Yes; Via FC AG_SEND and AG_RECV, max. via 10 CP 443-1 or 443-5
S5 compatible communication / User data per job, max.: 8 kbyte
S5 compatible communication / User data per job (of which consistent), max.: 240 byte
S5 compatible communication / Number of simultaneous AG-SEND/AG-RECV orders per CPU, max.: 24/24
Standard communication (FMS) / supported: Yes; Via CP and loadable FB
PROFINET CBA (at set setpoint communication load) / Setpoint for the CPU communication load: 20 %
PROFINET CBA (at set setpoint communication load) / Number of remote interconnection partners: 32
PROFINET CBA (at set setpoint communication load) / number of master/device functions: 150
PROFINET CBA (at set setpoint communication load) / total of all master/device connections: 4 500
PROFINET CBA (at set setpoint communication load) / data length of all incoming master/device connections, max.: 45 000 byte
PROFINET CBA (at set setpoint communication load) / data length of all outgoing master/device connections, max.: 45 000 byte
PROFINET CBA (at set setpoint communication load) / Number of device-internal and PROFIBUS interconnections: 1 000
PROFINET CBA (at set setpoint communication load) / Data length of device-internal und PROFIBUS interconnections, max.: 16 000 byte
PROFINET CBA (at set setpoint communication load) / Data length per connection, max.: 2 000 byte
PROFINET CBA (at set setpoint communication load) / Remote interconnections with cyclic transmission / Transmission frequency: Transmission interval, min.: 1 ms; Depending on preset communication load, number of interconnections and data length used
PROFINET CBA (at set setpoint communication load) / Remote interconnections with cyclic transmission / Number of incoming interconnections: 300
PROFINET CBA (at set setpoint communication load) / Remote interconnections with cyclic transmission / Number of outgoing interconnections: 300
PROFINET CBA (at set setpoint communication load) / Remote interconnections with cyclic transmission / Data length of all incoming interconnections, max.: 4 800 byte
PROFINET CBA (at set setpoint communication load) / Remote interconnections with cyclic transmission / Data length of all outgoing interconnections, max.: 4 800 byte
PROFINET CBA (at set setpoint communication load) / Remote interconnections with cyclic transmission / Data length per connection, max.: 450 byte
PROFINET CBA (at set setpoint communication load) / HMI variables via PROFINET (acyclic) / Number of stations that can log on for HMI variables (PN OPC/iMap): 2x PN OPC/1x iMap
PROFINET CBA (at set setpoint communication load) / HMI variables via PROFINET (acyclic) / HMI variable updating: 500 ms
PROFINET CBA (at set setpoint communication load) / HMI variables via PROFINET (acyclic) / Number of HMI variables: 1 000
PROFINET CBA (at set setpoint communication load) / HMI variables via PROFINET (acyclic) / Data length of all HMI variables, max.: 32 000 byte
PROFINET CBA (at set setpoint communication load) / PROFIBUS proxy functionality / supported: Yes; 32 PROFIBUS slaves max. connectable
PROFINET CBA (at set setpoint communication load) / PROFIBUS proxy functionality / Data length per connection, max.: 240 byte; Slave-dependent
Number of connections / overall: 48
Number of connections / usable for PG communication / reserved for PG communication: 1
Number of connections / usable for PG communication / adjustable for PG communication, max.: 0
Number of connections / usable for OP communication / reserved for OP communication: 1
Number of connections / usable for OP communication / adjustable for OP communication, max.: 0
Number of connections / usable for S7 basic communication / reserved for S7 basic communication: 0
Number of connections / usable for S7 basic communication / adjustable for S7 basic communication, max.: 0
Number of connections / usable for S7 communication / reserved for S7 communication: 0
Number of connections / usable for S7 communication / adjustable for S7 communication, max.: 0
Number of connections / usable for routing / reserved for routing: 0
Number of connections / usable for routing / adjustable for routing, max.: 0
S7 message functions / Number of login stations for message functions, max.: 47; Max. 47 with Alarm_S/SQ and Alarm_D/DQ (OPs); max. 8 with Alarm, Alarm_8, Alarm_8P, Notify and Notify_8 (e.g. WinCC)
S7 message functions / Symbol-related messages: Yes
S7 message functions / SCAN procedure: Yes
S7 message functions / Program alarms: Yes
S7 message functions / Process diagnostic messages: Yes
S7 message functions / simultaneously active Alarm_S blocks, max.: 250; Simultaneously active alarm_S/SQ blocks or alarm_D/DQ blocks
S7 message functions / Alarm 8-blocks: Yes
Alarm 8-blocks / Number of instances for alarm 8 and S7 communication blocks, max.: 300
Alarm 8-blocks / preset, max.: 150
S7 message functions / Process control messages: Yes
S7 message functions / Number of archives that can log on simultaneously (SFB 37 AR_SEND): 4
Number of messages / overall, max.: 256
Number of messages / in 100 ms grid, max.: 0
Number of messages / in 500 ms grid, max.: 256
Number of messages / in 1000 ms grid, max.: 256
Number of additional values / with 100 ms grid, max.: 0
Number of additional values / with 500, 1000 ms grid, max.: 1
Test commissioning functions / Status block: Yes; Up to 16 simultaneously
Test commissioning functions / Single step: Yes
Test commissioning functions / Number of breakpoints: 16
Status/control / Status/control variable: Yes; Up to 16 variable tables
Status/control / Variables: Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters
Status/control / Number of variables, max.: 70; Status/control
Forcing / Forcing: Yes
Forcing / Forcing, variables: Inputs/outputs, bit memories, distributed I/Os
Forcing / Number of variables, max.: 64
Diagnostic buffer / present: Yes
Diagnostic buffer / Number of entries, max.: 400
Diagnostic buffer / Number of entries, max. / can be set: Yes
Diagnostic buffer / Number of entries, max. / preset: 120
Service data / Can be read out: Yes
Emission of radio interference acc. to EN 55 011 / Limit class A, for use in industrial areas: Yes
Emission of radio interference acc. to EN 55 011 / Limit class B, for use in residential areas: No
Configuration software / STEP 7: Yes
Programming / Command set: see instruction list
Programming / Nesting levels: 7
Programming / Access to consistent data in process image: Yes
Programming / System functions (SFC): see instruction list
Programming / System function blocks (SFB): see instruction list
Programming / Programming language / LAD: Yes
Programming / Programming language / FBD: Yes
Programming / Programming language / STL: Yes
Programming / Programming language / SCL: Yes
Programming / Programming language / CFC: Yes
Programming / Programming language / GRAPH: Yes
Programming / Programming language / HiGraph®: Yes
Programming / Number of simultaneously active SFCs / DPSYC_FR: 2
Programming / Number of simultaneously active SFCs / D_ACT_DP: 8
Programming / Number of simultaneously active SFCs / RD_REC: 8
Programming / Number of simultaneously active SFCs / WR_REC: 8
Programming / Number of simultaneously active SFCs / WR_PARM: 8
Programming / Number of simultaneously active SFCs / PARM_MOD: 1
Programming / Number of simultaneously active SFCs / WR_DPARM: 2
Programming / Number of simultaneously active SFCs / DPNRM_DG: 8
Programming / Number of simultaneously active SFCs / RDSYSST: 8
Programming / Number of simultaneously active SFCs / DP_TOPOL: 1
Programming / Number of simultaneously active SFBs / RDREC: 8
Programming / Number of simultaneously active SFBs / WRREC: 8
Know-how protection / User program protection/password protection: Yes
Know-how protection / Block encryption: Yes; With S7 block Privacy
Width: 25 mm
Height: 290 mm
Depth: 219 mm
Weight, approx.: 750 g

Technical documents (1)

Siemens data sheet 6ES7412-2EK06-0AB0

Key features

1 MB work memory: 0.5 MB code, 0.5 MB data
1st interface MPI/PROFIBUS DP 12 Mbit/s (X1)
2nd interface Ethernet/PROFINET (X5), media redundancy
Isochronous mode via PROFIBUS DP or PROFINET
Powered from the S7-400 system power supply

About the Siemens 6ES7412-2EK06-0AB0

The Siemens 6ES7412-2EK06-0AB0 is the CPU 412-2 PN, the entry CPU of the S7-400 with PROFINET. Siemens's data sheet gives it 1 MB of work memory, split into 0.5 MB for code and 0.5 MB for data, a combined MPI/PROFIBUS DP interface at 12 Mbit/s and an Ethernet/PROFINET interface. It is powered from the S7-400 rack's system power supply.

What is the 6ES7412-2EK06-0AB0 used for?

It runs S7-400 stations that need PROFINET but not a large program, such as smaller lines and plant sections, with I/O in the rack and on PROFIBUS DP or PROFINET.

Lifecycle and successor

Discontinued.

Before you order

What to photograph or confirm so the right unit is quoted.

Check the full order number and the firmware version on the CPU's front label; send a photo of it. S7-400 CPUs of the same type differ by order number in memory and interfaces, so quote against the exact number, and list any interface modules (IF) fitted.

Alternatives for 6ES7412-2EK06-0AB0

The manufacturer’s named successor and other parts in the same family. None is a drop-in replacement without checking wiring, I/O and configuration for your installation.

Product	Manufacturer	Type	Lifecycle	Relationship	Qty Available	Price	Action
Siemens 6ES7412-3HJ14-0AB0CPU 412-3H for S7-400H/F/FH, 768 KB, MPI/DP and 2 sync interfaces	Siemens	Redundant PLC CPU (H-CPU)	Discontinued	Same family	On Request	On request	View ›
Siemens 6ES7414-2XK05-0AB0CPU 414-2, 1 MB, MPI/DP and PROFIBUS DP	Siemens	PLC CPU	Discontinued	Same family	On Request	On request	View ›
Siemens 6ES7414-3XM07-0AB0CPU 414-3, 4 MB, MPI/DP, PROFIBUS DP and IF slot	Siemens	PLC CPU	Active	Same family	On Request	On request	View ›
Siemens 6ES7416-2XP07-0AB0CPU 416-2, 8 MB, MPI/DP and PROFIBUS DP	Siemens	PLC CPU	Active	Same family	On Request	On request	View ›
Siemens 6ES7416-3XS07-0AB0CPU 416-3, 16 MB, MPI/DP, PROFIBUS DP and IF slot	Siemens	PLC CPU	Active	Same family	On Request	On request	View ›
Siemens 6ES7417-4XT05-0AB0CPU 417-4, 30 MB, MPI, PROFIBUS DP and 2 IF slots	Siemens	PLC CPU	Discontinued	Same family	On Request	On request	View ›
Siemens 6ES7414-4HM14-0AB0CPU 414-4H for S7-400H/F/FH, 2.8 MB, MPI/DP, DP and 2 sync interfaces	Siemens	Redundant PLC CPU (H-CPU)	Discontinued	Same family	On Request	On request	View ›
Siemens 6ES7416-3FS07-0AB0CPU 416F-3 PN/DP fail-safe, 16 MB, MPI/DP, PROFINET and IF slot	Siemens	Safety PLC CPU (F-CPU)	Active	Same family	On Request	On request	View ›

You may also be interested in

TIMC is an independent distributor. Manufacturer names and logos are the property of their respective owners and identify products we source; they do not imply manufacturer authorization or affiliation.

Need Siemens 6ES7412-2EK06-0AB0? Send us the details.

Request a Quote