Deep Sea Electronics DSE7510

Technical specifications

Manufacturer

Deep Sea Electronics

Manufacturer part no.

DSE7510

Type

Synchronising and load share controller

Application

Paralleling controller

Used with

Generating sets running in parallel with each other or with the mains

DC supply voltage, continuous

8 V to 35 V continuous

Cranking dropouts

Able to survive 0 V for 50 mS, providing supply was at least 10 V before dropout and supply recovers to 5 V

Maximum operating current

460 mA at 12 V, 245 mA at 24 V

Maximum standby current

375 mA at 12 V, 200 mA at 24 V

Charge fail/excitation range

0 V to 35 V

Output A (fuel)

15 A DC at supply voltage

Output B (start)

15 A DC at supply voltage

Outputs C & D

8 A 250 V (Volt free)

Auxiliary outputs E, F, G

2 A DC at supply voltage

Generator voltage range

15 V - 333 V AC (L-N)

Generator frequency range

3.5 Hz to 75 Hz

Magnetic pick up voltage range

+/- 0.5 V to 70 V

Magnetic pick up frequency range

10,000 Hz (max)

Governor output

Fully Isolated; Minimum Load Impedance: 1000Ω; Gain Volts 0 V - 10 V DC; Offset Volts + / - 10 V DC

AVR output

Fully Isolated; Minimum Load Impedance: 1000Ω; Gain Volts 0 V - 10 V DC; Offset Volts + / - 10 V DC

Overall dimensions

240 mm x 172 mm x 57 mm

Panel cut-out

220 mm x 160 mm

Maximum panel thickness

8 mm

Configurable inputs

9

Configurable outputs

5

Technical documents (1)

• DSE data sheet DSE7510

Key features

• Automatic synchronising with built-in synchroscope
• Closing onto a dead bus
• Isolated governor and AVR control outputs
• RS232 and RS485 ports
• 9 configurable inputs and 5 configurable outputs

About the Deep Sea Electronics DSE7510

The DSE7510 is an automatic engine control module that DSE designed to provide load share functions for diesel and gas generating sets with electronic and non-electronic engines. DSE says its load share functions include automatic synchronising with a built-in synchroscope and closing onto a dead bus, with outputs for the speed governor and automatic voltage regulator (AVR). Its data sheet gives 9 configurable inputs, 5 configurable outputs, RS232 and RS485 ports and a 240 mm x 172 mm x 57 mm case for a 220 mm x 160 mm cut-out. Deep Sea Electronics lists the DSE7510 as obsolete and names the DSE8610 MKII as its replacement.

What is the DSE7510 used for?

The DSE7510 controls one generating set in a multi-set load share system, synchronising it onto the bus and sharing load. It drives the governor and AVR through its isolated outputs.

Lifecycle and successor

Discontinued.

OEM successor: DSE8610 MKII

Before you order

What to photograph or confirm so the right unit is quoted.

Check the model number DSE7510 on the module's label. Send us a photo of the label and we will confirm the details before quoting.